Page 18 - QR PENTRUDER 3P8

Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw

1. Mount the base plate Eccentric cam bolt

Bolt the base plate to a solid object using Fig. 2. Base plate BE2 and column-CN 0.5 F/M-70.
an M16 / 5/8” anchor bolt. Use only high 4x levelling screws
quality anchors and bolts. Adjust the
support legs (see fig. 2). Level the base Fig. 6. Base plate BE2 and column-CN 0.5 F/M-70.
plate using the four leveling screws.

2. Mount the columns or columns

The column is locked by turning the
eccentric bolt Clockwise.

To release the column, the eccentric is
turned Counter Clockwise until it lifts
from the cone. To remove the eccentric
bolt, turn it slightly Clockwise again until
the load on the bolt is gone, and then pull
out the bolt, and then the column can be
removed. Do not insert your fingers in the
bolt hole!!

Pivoting head - PD1

Columns can be
rotate around its
own axis, and
locked in any
position

Socket on pinion Eccentric cam
Clamp screw lock bolt

Face tooth
coupling, 5°
increments

Fig. 7. Pivoting head-PD1 with column.

Pentruder® - Stronger than ever! Tractive AB 17 March 2009 Page 16
Applying Standards That Are Years Ahead Of the Competition.