Page 20 - QR PENTRUDER 3P8

Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw

3. Mount the lower carriage on the column

1. Loosen the socket on the
friction clutch one turn.
(19 mm / 3/4” spanner)

2. Slide the carriage over the
column

3. Adjust the height of the
carriage by turning the feed
shaft socket with a ratchet or
knuckle bar.

4. Tighten the friction clutch
socket.
Tighten firmly, but do not over
tighten!

Fig.8 Lower carriage

4. Mount the upper carriage

on the column

1. Loosen the socket on the
friction clutch one turn.

2. Slide the carriage over the
column

3. Adjust the height of the
carriage by turning the feed
shaft socket with a ratchet
or knuckle bar.

4. Tighten the friction clutch
socket.
Tighten firmly, but do not
over tighten!

Pentruder® - Stronger than ever! Fig. 9 Carriage CE1 with Electric feed unit ET100.
Applying Standards That Are Years Ahead Of the Competition.
Tractive AB 17 March 2009 Page 18