Page 21 - QR PENTRUDER 3P8

Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw

5. Attach the lower magazine and swivel roller assembly

Normally the lower assembly unit is
mounted on the carriage with the swiveling
rollers pointing towards the surface the
base plate is mounted on.

Warning: Be careful after having mounted
the carriages on the column.

Make sure the friction couplings are
tightened to avoid injuries, this applies to
both carriages. Do not over tighten the
clamp socket!

Slide the complete lower assy sideways
with the Quick Diconnect Coupling
receptacles engaging with the locator
studs on the carriage. See figure 11.

Tighten the QDC lock bolts firmly, but do
NOT over tighten! See figure 12.

Fig. 10 Lower magazine and swivel roller assembly

Fig. 11 and 12 Fitting and fastening the lower assembly.

Pentruder® - Stronger than ever! Tractive AB 17 March 2009 Page 19
Applying Standards That Are Years Ahead Of the Competition.