Page 35 - TEESIN E-CATALOG 200219EN VER2

M ULTI TOOL

MAKING PLUNGE CUTS:
l Attach a plunge cutting blade and use it to make cutouts
in plasterboard, plywood or weather board or for cutting out
UNDERCUTTING DOOR JAMBS:
l When installing floating floors, you’ll often need to trim the base
of the doorjambs. Can use a segment blade to trim the doorjamb,
positioning a flooring offcut underneath the blade to align it at
the correct height.
SLICING THROUGH FASTENERS:
l When replacing weatherboards or trim, you may encounter nails
or screws that are impossible to remove. Slide a metal cutting blade
behind the trim and cut them loose, protecting the wall surface with
a sheet metal offcut.
R5101 R5102A
REMOVING GROUT:
l Fit your oscillating tool with a carbide grit segment blade
and use it to quickly remove the grout between the tiles. It’s
much faster than a handheld grout saw.
SCRAPING AWAY GLUE:
l With a scraper attachment, an oscillating tool can be used to
remove dried adhesives from hard surfaces, like concrete garage
floors. You can also use it to remove silicone sealant or to scrape
away small concrete splashes after a masonry job.
R5101 R5102A
VOLTAGE: 230-240v VOLTAGE: 230-240v
FREQUENCY: 50-60Hz FREQUENCY: 50-60Hz
RATED INPUT POWER: 300-400w RATED INPUT POWER: 300-400w
ROTATION SPEED: 15000-22000 rpm ROTATION SPEED: 15000-22000 rpm
DIMENSION(mm): 250 x 50 x 70 DIMENSION(mm): 250 x 50 x 70
WEIGHT: 1.6kg WEIGHT: 1.6kg
page 35