Page 36 - TEESIN E-CATALOG 200219EN VER2

C HAIN SAW

The ICS 695 features include an easy to start engine with
higher energy ignition system and durable, long-lasting
components including a new muffler, carburetor and piston
& cylinder. Built to provide the best combination of perfor-
mance and portability for cutting in ground utility pipe. The
ICS 695 offers an unmatched power to weight ratio allowing
you to cut up to 16’’ deep in dustile iron, cast iron,
PVC, HDPE and insituform lining. Also capable of
running the full line of 16-inch(40cm) proforce concrete
cutting chains, meaning you can use the saw on masonry,
stone and even re-inforced concrete. Perfect for pipe taps, l Use on concrete, stone, masonry, ductile iron pipe,
utility vaults, bridge work and other utility applications. cast iron pipe and more.
Based on the best-selling ICS 695 saw platform, the ICS 695 l Most versatile gas-powered saw.
is the highest horsepower ICS gas saw for frequent-use by l New piston and cylinder lowers engine temperature.
general construction, utility contractors and concrete l Longer life muffler with reinforced internal baffle.
professionals. Package includes ICS 695 cc powerhead, l Easy to start with higher energy ignition system.
12” guidebar, 12” Twin Max Chain. l New easy to tune carburetor.
ENGINE TYPE 2-stroke, Air cooled
DISPLACEMENT 94cc(5.7cu-in)
HORSEPOWER 4.8kW(6.4hp)@9000rpm
TORQUE 5.7Nm(50.4 in-Lbs)@7200rpm
ENGINE SPEED 9300+/- 150rpm(max)/2700+/-rpm
CHAIN SEED AT MAXIMUM POWER 28m/s(5500ft/min)
WEIGHT 9.5kg(21Lbs)powerhead only
DIMENSIONS (LxHxW) 46cm(18in) / 36cm(14in) / 30cm(12in)
STARTER recoil, dust and water resistant
IGNITION special water resistant electronic ignition
FUEL RATIO 2%(50.1)gasoline-to-oil
FUEL CAPACITY 1 litre(0.26 gallon)
WATER SUPPLY REQUIREMENT minimum 1.5bar(20psi)
WATER FLOW REQUIREMENT minimum 4 Lpm(1 gpm)
GUARANTEED SOUND POWER LEVEL,LWA 115dB(A)(Kwa=3.0dB(A))
EQUIVALMENT SOUND PRESSURE AT THE
OPERATORS EAR LWA 104.6dB(A)(K=2-0dB(A))
VIBRATION, AHVEQ CONCRETE CUTTING 3.6m/s 2 (K=1.0m/s 2 )Front Handle
3.1m/s 2 (K=1.0m/s 2 )Rear Handle
5.62m/s 2 (K=0.2m/s 2 )Front Handle
VIBRATION, AHVEQ PIPE CUTTING 5.28m/s 2 (K=0.2m/s 2 )Real Handle
page 36