Page 82 - ITALVIBRAS E-CATALOG
P. 82
ITV-VR/ITVAF
Technical features
Power supply Insulation class structure with the standardized cradle
Three-phase voltage from 24V to 690V at Class F (155°C). type RS2 except for frame size AF10, for
the various frequencies, depending on this the cradle fixing is type RS1.
the type and series. It is advisable to use Tropicalization
the Vibravar, Multivar or the CFV variable Standard on all vibrators, with vacuum Lubrication
high frequency power suppliers to power encapsulation up to size AF33 and for fra- All the electric vibrators are correctly
the electric vibrators. me size AF70, with “drop by drop” trickle lubricated in our factory and need no
system for sizes AF50 and AF68. further lubrication when used. Special
Conformity to the European Directives grease for high-speed operation is used
Low Voltage 2006/95/EC. Ambient temperature for frame sizes AF50, AF68 and AF70 a
To operate correctly, from -20°C to +40°C. periodic re-lubrication is recommended
Reference standards by means of special grease nipples. The
EN 60034-1. Vibrator thermal protection excess grease is discharged into the
With PTC rated thermistor heat detectors weight compartment by means of the
Operation 130°C installed as part of the standard differentiated labyrinth system.
Continuous service (S1) at the maximum assembly size AF70 onwards.
declared centrifugal force and electric Also on request thermistors with different Terminal box
power values. temperatures and anti-condensation hea- Generously sized to make the electrical
ters can be assembled on the lower sizes. connections easier. Special shaped termi-
Centrifugal force nals allow to fix the power supply cable.
Range extended up to 5300 kgf (52kN) Fixing of the vibrator
with force output adjustable from 0 to In all positions and therefore without Electric motor
100%. restriction. Two different types of con- Three-phase asynchronous type.
nection are available for the ITV-VR and
Mechanical protection ITVAF series: fixed connection, where the Casing
IP66 according to IEC 529, EN 60529; IK08 electric vibrators are connected to the Specifically designed for high speed
protection against impact. structure by bolts through fixing holes duty. In high tensile strength aluminium
and the RS cradle connection, where the alloy for frame sizes AF10, AF30 and AF33.
electric vibrators are connected to the In spheroidal cast iron for sizes
AF33 (600245), AF50, AF68 and AF70.
N
B
82
H
