Page 16 - QR CIMAR MULTI-GRINDER

CMG/TEESIN/MAN/01/15 Compile by CJ

7. Troubleshooting

Problem Possible Cause Possible Solution
Motor Fail to start 1. On/Off switch in the
off position. 1. Turn the switch to
Uneven Grinding Action 2. Floor grinder and/or the “On” position.
extension cord is not
plugged into the 2. Determine that all
power source.
3. Improper extension electrical
cord size and
capacity. connections have

4. Excessive extension been properly made.
cord length.
3. Get the proper
5. Improper motor
cooling. extend cord size and

6. Excessive load to capacity that meet
the motor.
the specifications.
7. Faulty electrical
Component 4. Reduce the

1. Excessive material extension cord
build-up on the
caster wheel face length as required to
surface.
achieve the
2. Excessive caster
wheel bearing wear. minimum voltage

operating

specification as

required by the

motor manufacturer.

5. Let the motor cool

down.

6. Use the right load to

meet the operating

specification.

7. Require qualify

service personnel

1. Remove material.

Readjust wheel

scrapers to properly

remove material

build-ups.

2. Excessive axle wear.

Replace axle.

For technical questions, please call +65 - 66431213 14
For Products Enquiry, please call +65 - 67581211