Page 13 - 360 Steamer.Manual.ENG

USING THE VACUUM FUNCTION
! CAUTION! VACUUMING LIQUIDS: Remove the polyester filter BEFORE vacuuming liquids.

! WARNING! Always unplug the unit before disassembling the vacuum container.
! CAUTION! Lock the wheels before disassembling the vacuum container.
To remove the polyester filter, release the latches holding the bottom container of the vacuum in place
(Fig. 5 and 6). Remove the bottom cannister. Remove the polyester filter by turning it counterclockwise
and pulling down (Fig. 7). Reattach the bottom of the vacuum cannister. Make sure the latches are tightly
closed.

PULL

1 2
Fig. 5 Fig. 6 Fig. 7

TO BEGIN VACUUMING:
Turn on the main vacuum switch (L) to position 1 (Fig. 8).

CONTROL THE VACUUM SPEED FROM THE DISPLAY: L
Select the B button on the control panel to start the vacuum.
The vacuum will start on the fastest speed. Fig. 8
The control light D will also illuminate.
To change speed, press and release button B on the display.
Continue pressing B until you reach the desired speed. G F E D
Control light D will change color depending on the
speed of the vacuum:
Green = Minimum
Orange = Medium
Red = Maximum

H I J K A B C

TURN THE VACUUM ON AND OFF FROM THE HANDLE:
Pressing the B1 button on the handle allows you to turn the vacuum on or off.

C1
B1

13