Page 110 - Introduction to New Jerusalem Evangelism_Neat
P. 110

It was almost impossible that the inter-twining process happened naturally by
            the  strong  blowing  wind  due  to  gravity  effect.  They  needed  two  opposite  winds
            blowing the two near-by hanging roots at the same time which were impossible. If this
            was done manually then who in this world would enter and walk in the jungle to find
            such large trees on both banks of a river and inter-twine every 2 hanging roots? Who
            would cut the 25-m high tree, lay it across the 20-m wide river in the jungle and tied it
            strongly to the existing two trees? This area was not public road and all this facility was
            done for free. The possibility of man’s work was also close to zero. Then whose work
            and product was it? Only one possibility, the works of the angels of God considering
            the possible fact that the river at that night time, before the torrential rain pouring
            down, was only a dried small valley in the normal condition. Consequently one could
            cross the valley easily by the ‘ordinary walking in the forest’. Praise Lord Jesus who is
            always with His servants performing His Great Commission!
                  The  crossing  test  gave  us  the  additional  information  due  to  the  near-miss
            accident. Ps J. Rengkung lost his body’s balance while walking on the beam and holding
            the hanging roots at the point near the middle of the beam. Combining with the other
            data of the twisting of the beam towards the middle i.e. due to the most strong current
            of the river, it could be concluded that walking on the beam one people by one people,
            one after another, was dangerous due to the twist i.e. the twisted surface inclination
            and its slippery. (The previously-laid horizontal surface had changed its position into
            the inclined surface because of the strong current in the middle of the river). This could
            be overcome using more weights imposed on and along the beam in order to reduce
            the twist i.e. the cross-sectional angle of rotation at the middle. It meaned that we had
            to make a long human chain, and walked together on the beam by shifting our bodies
            to the side, step by step, along the beam. Since we knew roughly the size of the beam
            we could possibly believe on the strength of the tree-stem beam.
                  Finally we mounted ourselves, one by one on the beam, walked successively
            together, hand-in-hand or hand-on-shoulder, while the other hand holding tightly the
            hanging roots (inter-twined rope). Everybody had to touch the beam surface first by
            the foot i.e. the front-end of the shoe, before putting his (her) foot confidently on the
            beam, stood up firmly and then shifted his (her) body aside. As we moved step by step,
            when one’s position was at the middle of the beam, one could feel the strong current
            of  water  passing  around  our  legs.  The  water  surface  was  just  near  by  our  ankles
            (remember: the beam was drowned more than half-meter around the middle point).
            The current pushed and tried to shift our legs from our positions. We had to stand up
            firmly and hold each other tightly. There we knew why the crossing could not be done
            solitarily, one  after one,  because the weight of one  person on one’s  legs was  not
                                                 109
   105   106   107   108   109   110   111   112   113   114   115