Page 200 - Foton Workshop Manual - Auman EST-M
P. 200
DI - 146 Diagnosis - Diagnosis-fault diagnosis of electronic and electrical parts
c. Check the reset function
Confirm if the wiper motor works properly at high and low
speed. Disconnect the wiper motor connector and measure
the conduction between Terminal 3 and 6 of wiper motor.
Standard resistance:
Multimeter connecting terminal Standard value
B080(3)-B080(6) About 0Ω
Check if the result is ok?
Yes> Check or replace harness.
NO>repair or replace the wiper motor assembly.
DI-146
