Page 381 - Workshop Manual - Aumark (BJ1051)

04-237
Diagnosis-Wipers and washers

Symptom Suspected area Refer to
1. Combination switch (damaged) Chapter 41 Steering
Mechanism-Combination Switch,
Wiper does not work in intermittent Replacement
position (INT).
2. Harness (open or short to ground) -
3. Three-in-one controller (damaged) -
1. Combination switch (damaged) Chapter 41 Steering
Mechanism-Combination Switch,
Wiper does not work in low speed Replacement
position (LO).
2. Harness (open or short to ground) -
3. Three-in-one controller (damaged) - 04
1. Combination switch (damaged) Chapter 41 Steering
Mechanism-Combination Switch,
Wiper does not work in high speed Replacement
position (HI).
2. Harness (open or short to ground) -
3. Three-in-one controller (damaged) -
1. Harness (open or short to ground) -
Wiper can not return to original 2. Cam switch junction (contact -
position after switched off.
poor)
1. Washer fluid (insufficient) -
2. Nozzle (clogged) Chapter 55 Wipers and
Washers-Nozzle, Replacement
3. Hose (damaged) -
Washer does not work while wiper is 4. Combination switch (damaged) Chapter 41 Steering
normal. Mechanism-Combination Switch,
Replacement
5. Washer motor (damaged) Chapter 55 Wipers and
6. Harness Washers-Washer, Replacement
-
1. Nozzle (clogged) Chapter 55 Wipers and
Washers-Nozzle, Replacement
2. Hose (damaged) -
3. Washer motor (damaged) Chapter 55 Wipers and
Washer fluid can not be sprayed. Washers-Washer, Replacement
4. Combination switch (damaged) Chapter 41 Steering
Mechanism-Combination Switch,
Replacement
5. Harness (open or short to ground) -

Page 381