Page 465 - Workshop Manual - Aumark (BJ1051)

04-321
Diagnosis- combination meter

Combination meter

Notes

1. Power off.
(a) Before you remove or install any electrical device or when tools or equipment are accessible
to bare electrical terminals, be sure to disconnect battery negative cable first in order to
prevent personal injury or vehicle damage.
(b) Ignition switch must be turned OFF unless specifically stated otherwise.
2. Removing combination meter or disconnecting battery negative cable will clear day
odometer and clock on combination meter.
Tip:
Total odometer will not be cleared. 04
3. Disconnecting battery negative cable will cause audio system to lose saved settings.
Tip:
After battery negative cable is reconnected, you need to reset audio system. (Refer to “Operation
Manual of the Audio System” in Chinese and English.)
4. Ignition switch expression
Ignition switch (position) Ignition switch expression

LOCK Ignition switch OFF

ACC Ignition switch in ACC
ON Ignition switch ON

START Engine start

Page 465