Page 469 - Workshop Manual - Aumark (BJ1051)

04-325
Diagnosis- combination meter

SN Item Description

Rear-view mirror
26 defrost/defog indicator Lighted up according to signals received from
light (optional) rear-view mirror defrost/defog switch.
Brake system low Lighted up according to signals received from low
27 pressure warning pressure alarm switch.
indicator light
Lighted up by ECM according to malfunction rating in
Engine stop indicator
28 light the case of engine electronic control system
malfunction.

Low brake (or clutch) Lighted up as low brake (or clutch) fluid level alarm
29 fluid level warning switch is turned ON when brake (or clutch) fluid level
indicator light is below minimum scale line.
04
Lighted up as water sedimentation switch installed in
31 Water sedimentation oil-water separator is turned ON when water
indicator light (optional) sedimentation in diesel oil filter element from the
separator reaches a certain volume.

ABS malfunction Lighted up by ABS control unit in the case of ABS
32 indicator light malfunction.

33 Generator indicator light Lighted up in the case of charging system
malfunction.
ASR blink code
indicator light (ABS In the case of ABS malfunction, ABS control unit will
34 blink code indicator light up ASR blink code indicator light through which
light) malfunction blink code is output.
Coolant temperature
35 warning indicator light Lighted up when coolant temperature is above 102℃.

36 Fuel indicator light Lighted up as fuel alarm switch is turned ON when
fuel in fuel tank is below calibration scale.

When ECM detects a general failure in the system,
38 SVS warning light this light will come on and is always lighted up with
diagnostic switch in OFF position until the trouble is
cleared.
Air cleaner clogging
39 warning indicator light Comes on when intake system is obstructed.
EBD warning light Lighted up by ABS control unit in the case of EBD
40
(optional) system malfunction.
ESP warning light Lighted up by ABS control unit in the case of ESP
42
(optional) system malfunction.
41 PTO indicator light Comes on when PTO switch is turned ON to allow
(optional) PTO to work.
30 Reset button Sets and resets LCD screen signals.

LCD screens
SN Item Description
Clock Displays time, in addition, allows time settings and
switching between day odometer and clock through
37 reset button.

Odometer Displays total kilometrage of vehicle (this information
can not be reset).

Page 469