Page 114 - Foton Workshop Manual - Sauvana

03-28
MAINTENANCE SPECIFICATION - FRONT SUSPENSION
FRONT SUSPENSION

MAINTENANCE DATA

Front wheel alignment
Toe-in Standard value 2.2±1mm(10'±5')

Camber angle 12.08°±30'
Camber angle of king pin 3.5°±30'

Radial runout of the Standard value 0.4mm
wheel
Axial runout of the wheel Standard value 0.25mm

Specification of the front 265/70R16 220±10kPa
wheel/pressure value 265/65R17 220±10kPa

Specification of the rear 265/70R16 240±10kPa
wheel/pressure value 265/65R17 240±10kPa

Run out tolerance of the wheel ≤ 1.2mm

TORQUE REQUIREMENTS

Fasteners N•m

The blocking nut of the track rod lever 81~99
The mounting nuts on the top of the front vibration 63~77
isolator
The mounting nuts on the bottom of the front 110~130
vibration isolator

The fixed bolts on the button head bracket of the 120~150
lower oscillating arm

The fixed nuts connecting the upper oscillating arm 120~140
shaft and the body frame
The fixed nuts on the fetlock of the upper oscillating 85~145
arm
The connecting bolts and nuts between the lower 150~190
oscillating arm and the body frame

The fixed bolts on the fetlock bracket of the lower 120~150
oscillating arm

The fixed nuts on the fetlock bracket of the lower 130~190
oscillating arm
The connecting bolts between the stock stabilizer 41~51
and the body frame

Page 114