Page 110 - Foton Workshop Manual - Sauvana

03-24
MAINTENANCE SPECIFICATION - TRANSMISSION(JC538)

III. Fit clearance Standard value 0~0.6mm
between the
synchronizer gear
bushing of the third/forth Limit value 0.6mm
gear and the shifting
fork

I. Fit clearance between Standard value 0~0.6mm
the synchronizer gear
bushing of the first/
second gear and the Limit value 0.6mm
shifting fork
III. Axial clearance of the Standard value 0~0.6mm
synchronizer toothholder
of the third/forth gear Limit value 0.6mm

TORQUE REQUIREMENTS

Transmission model

Fasteners N•m

Plug of oil draining of the transmission 65~78

Plug of oil filling of the transmission 65~78
Connecting bolt of the transmission and the engine 30~42

The fixed bolts on the body bracket of the 21~25
transmission
The connecting bolt of the transmission and the 46~56
body bracket

The fixed bolts on idler shaft bracket of the reverse 38~49
gear
The fixed bolts of the outspread shell 30~42

The fixed bolts of the front shell 30~42
The fitting bolt of the shifting yoke 38~49

The fixed bolts of the front bearing cap of the 7~11
transmission
The fixed bolts of the clutch housing 30~42

The fixed bolts on the back plate of the back shell 14~21

Page 110