Page 109 - Foton Workshop Manual - Sauvana
P. 109

03-23
                                      MAINTENANCE SPECIFICATION - TRANSMISSION(JC538)

                  Axial clearance between  Standard value                            0~0.5mm
                  the synchronizer ring of
                  the forth gear and the   Limit value                                0.5mm
                  gear

                  Axial clearance between  Standard value                            0~0.5mm
                  the synchronizer ring of
                  the third gear and the   Limit value                                0.5mm                         03
                  gear
                  Axial clearance between  Standard value                            0~0.3mm
                  the synchronizer ring of
                  the second gear and the   Limit value                               0.3mm
                  gear

                  Axial clearance between  Standard value                            0~0.3mm
                  the synchronizer ring
                  of the first gear and the   Limit value                              0.3mm
                  gear
                  V. Radial clearance     Standard value                             0~0.6mm
                  between the
                  synchronizer ring of the
                  reverse gear and the    Limit value                                 0.6mm
                  gear

                  Axial clearance between  Standard value                            0~0.6mm
                  the synchronizer ring of
                  the forth gear and the   Limit value                                0.6mm
                  gear
                  Axial clearance between  Standard value                            0~0.6mm
                  the synchronizer ring of
                  the third gear and the   Limit value                                0.6mm
                  gear

                  Axial clearance between  Standard value                            0~0.6mm
                  the synchronizer ring of
                  the second gear and the   Limit value                               0.6mm
                  gear
                  Axial clearance between  Standard value                            0~0.6mm
                  the synchronizer ring

                  of the first gear and the   Limit value                              0.6mm
                  gear

                  V. Radial clearance     Standard value                             0~0.6mm
                  between the
                  synchronizer ring of the
                  reverse gear and the    Limit value                                 0.6mm
                  gear


                                                                                                      Page 109
   104   105   106   107   108   109   110   111   112   113   114