Page 196 - Arch binder

Operable Partitions KWP-FOLD - TRIMLESS
10 22 26 (10650)
PART 2 - PRODUCT SPECIFICATION

2.01 ACCEPTABLE MANUFACTURER 2.03 OPERATION
A. Moveable glass walls shall be CLEAR-DIVISIONS A. Operation shall Paired Panels, which are top supported by one
KWP-Fold Paired panels as manufactured (1) carrier per panel on an overhead aluminum track.
by KWIK-WALL.
2.04 STACK ARRANGEMENTS
2.02 PANEL CONSTRUCTION A. Stack Type: Panel storage confi guration shall be (select):
A. Panel Dimensions: Standard panel dimension shall be a nominal 1. Standard Center Stack: consisting of panels stacking on
1 13/32 " [36] thick. center to the wall’s installed position.
B. Horizontal Top and Bottom Rails: Top and bottom rails shall be B. Stack Quantity: Panels shall be stored at one end of the wall or
continuous one-piece extrusion manufactured of structural grade both ends.
aluminum as engineered by HAWA with removable end caps.
®
Rails shall utilize a cam lock feature to provide positive mechanical 2.05 FINISHES
attachment to glass. (Passive friction type or adhesive applied
rails shall not be allowed for safety reasons.) A. Hardware Finish: Panel hardware including horizontal rails
shall be fi nished of (select):
C. Bottom Rail Locking System: Each bottom rail glass retainer 1. Standard Finish: Clear Anodized Aluminum.
shall contain (select):
1. Standard Operable Floor Lock: consisting of a face activated B. Pull Handle Finish: Handle fi nish shall be (select):
lever located on one (1) side of the panel connected to a fl oor 1. Standard Finish: consisting of Stainless Steel Satin Effect
lock that engages a recessed spring loaded dust-proof strike fi nish
to provide stability and security when the moveable glass
wall system is setup in the extended position. Intermediate 2.06 PERIMETER TRIM AND SEALS
panels shall have face activated lock for additional stability and A. Trim and Seals shall consist of (select):
security.
1. Standard Trimless: consisting of 3/8" [10] or 1/2" [12.7]
2. Optional Keyed / Thumb Turn Lock: consisting of key tempered glass with a sanded / beveled edge, resulting in a
operated cylinders on both sides or key operation on one (1) minimal groove appearance between adjacent glass panels.
side and thumb turn operation on opposite side. 2. Optional Vertical Protective Edge Trim: consisting of
3. Optional Thumbturn: Consisting of an operable fl oor lock / 8" [10] or / 2" [12.7] tempered glass with a sanded / beveled
3
1
operated by a thumb turn that engages a recessed spring edge utilizing a full vertical transparent protective edge trim
loaded dust-proof strike to provide stability and security when encapsulating the edge of the glass.
the moveable glass wall system is extended.
1
3
D. Glass: Panels shall be glazed with / 8" [10] or / 2" [12.7] tempered 2.07 CLOSURE SYSTEMS
glass that is manufactured in accordance with ASTM C 1036-01, A. Initial Closure System: The lead pair (the fi rst panels exiting
ASTM C 1048-04, and ANSI Z97.1. Glass fi nish shall be (select): the stack) shall intersect vertically against a rigid wall surface
1. Standard Clear: consisting of clear tempered glass (select): as accomplished by a lead panel that does not use any vertical
jamb to affect initial closure. Trail edge of lead panel shall
a. / 8" [10] thick glass for Panel Heights up to 9'-0" (2.74 m).
3
contain a foot-operated fl oor lock.
b. / 2" [12.7] thick glass for Panel Heights up to 10'-0"
1
(3.05 m). B. Final Closure System: The fi nal closure panel (the last panel
2. Optional Smoked Bronze, Smoked Gray, Smoked Green, at the stack end) shall provide a method for affecting fi nal
Smoked White or Clear Satin Etched: consisting of tinted closure of the moveable glass wall system. The type of fi nal
laminated glass (select): closure panel shall be (select):
1. Standard Fixed Pivot Panel Closure: consisting of a panel
3
a. / 8" [10] thick glass for Panel Heights up to utilizing top and bottom pivots that allows the panel to pivot
9'-0" (2.74 m). 90 in both directions and be used to affect fi nal closure,
o
1
b. / 2" [12.7] thick glass for Panel Heights up to and provides access thru the moveable glass wall system
10'-0" (3.05 m). when it is setup in the extended position.
3.Optional Clear Satin Etched: consisting of translucent 2. Optional: Same as intital closure
tempered or laminated glass (select): 3. Optional Pocket Door(s): (see “Glass Wall Pocket Door”
3
a. / 8" [10] thick glass for Panel Heights up to brochure for complete details and specifi cations).
9'-0" (2.74 m).
1
b. / 2" [12.7] thick glass for Panel Heights up to
10'-0" (3.05 m).
3
4.Optional Decorated or Patterned: consisting of / 8" [10]
tempered glass decorated or patterned as selected by designer.
(Maximum Panel Height 9'-0" (2.74 m)).

E. Panel Weight: Maximum panel weight shall not exceed 330 lb.
(150 kg) calculated at 7.35 lb. / ft. (36 kg / m ).
2
2
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com 05-16