Page 232 - Arch binder

Operable Partitions KWV-Tec - TRIMMED
10 22 26 (10650)
PART 2 - PRODUCT SPECIFICATION

2.01 ACCEPTABLE MANUFACTURER A. Stack Type: Panel storage confi guration shall be (select):
A. Moveable glass walls shall be CLEAR-DIVISIONS 1. Standard Perpendicular Stack: consisting of panels stacking
o
KWV-Tec - TRIMMED ACOUSTICAL Individual Panels as at a 90 angle perpendicular to the wall’s installed position.
manufactured by KWIK-WALL Company. 2. Optional Parallel Stack: consisting of panels stacking
parallel to the wall’s installed position.
2.02 PANEL CONSTRUCTION Note: Parallel stacking confi guration may not be possible in
A. Panel Dimensions: Standard panel dimension shall be a every application. Due to minimum stacking / pocket clearances
nominal 1 7/16 " [36.5] thick. required,prior approval of the parallel stacking confi guration
B. Perimeter Door Frames: Top and bottom rails and vertical stiles shall be approved by KWIK-WALL.
shall be continuous one-piece extrusion manufactured of
structural grade aluminum as engineered by Hawa with 3. Optional Remote Stack: consisting of panels located
®
removable end caps. remotely from the wall’s installed position, as shown on the
C. Bottom Rail Locking System: Each bottom rail glass retainer submitted shop drawings.
shall contain (select):
B. Stack Quantity: Panels shall be stored in designated stack
1. Standard Thumb Turn Lock: Consisting of an operable fl oor area as required for panel storage.
lock operated by a thumb turn that engages a recessed spring
loaded dust-proof strike to provide stability and security 2.05 FINISHES
when the moveable glass wall system is extended. A. Hardware Finish: Panel hardware including horizontal rails
shall be fi nished of (select):
2. Optional Keyed / Thumb Turn Lock: consisting of key 1. Standard Finish: Clear Anodized Aluminum.
operated cylinders on both sides or key operation on
one (1) side and thumb turn operation on opposite side. 2. Optional Finish: Custom Anodized per supplied sample.
3. Optional Finish: Powder Coated Paint to any RAL code.
3. Optional Operable Floor Lock: consisting of a Face-activated
foot lock located on one (1) side of the panel that engages a B. Pull Handle Finish: Handle fi nish shall be (select):
recessed spring loaded dust-proof strike to provide stability 1. Standard Finish: consisting of Stainless Steel Satin fi nish.
and security when the moveable glass wall system is setup in 2. Optional Finish: consisting of Pull Handle to match
the extended position Hardware Finish selection (as close as possible).
D. Glass: Panels shall be glazed with 1/2" [12.7] laminated glass 2.06 PERIMETER TRIM AND SEALS
that is manufactured in accordance with ASTM C 1036-01,
ASTM C1172-03 and ANSI Z 97.1. Glass fi nish shall be (select) A. Trim and Seals shall consist of (select):
1. Standard Clear: consisting of laminated glass (select): 1. Standard Trimmed: consisting of / 2" [12.7]
1
a. 1/2" [12.7] thick glass for Panel Heights up to laminated glass with a sanded / beveled edge
10’-6" (3.2 m). utilizing a full vertical extruded aluminum astragal
containing a continuous contact, fl exible rubber seal
2. Optional Glass writable surface, installed along the Lead vertical edge of each panel.
a.1/2” [12.7] thick glass for Panel Heights up to 10'-6" Aluminum astragal shall encapsulate the edge of the
(3.2 m). glass for enhanced security and rigidity.
2. Standard Horizontal Top: consisting of continuous
3. Optional Sandblasted: consisting of laminated glass (select): contact black vinyl seals provided on both sides of each
a. 1/2” [12.7] thick glass for Panel Heights up to panel.
10'-6" (3.2 m).
3. Standard Bottom Seal: consisting of continuous contact
4. Optional Opaque: consisting of laminated glass (select): black vinyl seals provided on both sides of each panel.

a. 1/2” [12.7] thick glass for Panel Heights up to 2.07 CLOSURE SYSTEMS
10'-6" (3.2 m).
A. Initial Closure System: The lead panel (the fi rst panel exiting
E. Panel Weight: Maximum panel weight shall not exceed 330 the stack) shall form a seal against an Adjustable Starter
lb. (150 kg) calculated at 8.33 lb. / ft. (40.65 kg / m ). Jamb shall consist of an aluminum extrusion that is
2
2
permanently mounted to a structural wall surface and is fi eld-
2.03 OPERATION adjustable to compensate for out-of-plumb conditions of the
A. Operation shall be Individual Panels with a Multi-Directional fi xed wall.
track system, that allows the panels to negotiate 90°, “X”, “L”, B. Final Closure System: The fi nal closure panel (the last panel at
and “T” intersections as required for movement of panels the stack end) shall provide a method for affecting fi nal
from storage location(s) to various installed positions. closure of the moveable glass wall system. The type of fi nal
Panels shall be top supported by two (2) carriers featuring closure panel shall be (select):
dual horizontal precision bearings with high strength
polymer tires riding on a structural aluminum track. 1. Standard Fixed Pivot Panel Closure: consisting of a panel
utilizing top and bottom pivots that allows the panel to pivot
0
2.04 STACK ARRANGEMENTS 90 in one (1) direction and be used to affect fi nal closure,
and provides access thru the moveable glass wall

Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com 05-18