Page 233 - Arch binder

KWV-Tec - TRIMMED PART 2
Operable Partitions
10 22 26 (10650)
GENERAL SPECIFICATION

system when it is setup in the extended position. The trail 2.10 CARRIER SYSTEMS
edge of the Fixed Pivot Panel shall contain a continuous
contact, fl exible rubber seal that interfaces with aluminum A. Carrier Type: Each individual panel shall be top supported by
5
Adjustable Wall Jamb. The wall jamb shall be permanently two (2) carriers utilizing a / 8” [16] diameter pendant bolt. Each
mounted to a structural wall surface and is fi eld-adjustable carrier shall consist of dual horizontal, permanently-lubricated,
to compensate for out-of-plumb conditions of the fi xed wall. precision ground steel bearings with high strength polymer tires
One (1) side of the fi nal closure panel shall contain a pull as required for smooth and quiet operation. Multi-Directional
o
handle. (Refer to Part 2.05 "B. carriers shall be capable of negotiating 90 , “X”, “L”, and “T”
Pull Handle Finish".) intersections. As required for moving panels from storage
location(s) to various installed positions.
Note: Pivot Panel may not be required. Consult your KWIK-
WALL representative for proper confi guration. See page 7 for B. Carrier Size: The carrier size shall be:
details. 1. Type 425 Multi-Directional Carrier: certifi ed to be capable of
supporting up to 425 lbs. ( 193 kg ) of total live load weight
2. Optional Fixed Swing Panel Closure: consisting of a panel per panel
utilizing top pivot and bottom pivot that engages with a
self-closing unit containing a hold-open feature that is 2.11 SUSPENSION SYSTEMS
recessed fl ush into the fl oor allowing the panel to pivot 90 0
in one (1) direction and be used to affect the fi nal closure, A. Mounting Systems: The KWV-Tec TRIMMED track system
and provides access thru the moveable glass wall system shall be supported by (select):
when it is setup in the extended position. The trail edge of 1. Standard Drop Rod Mount: consisting of steel drop
the Fixed Swing Panelshall contain a continuous-contact, rod brackets with drop rods, consisting of adjustable rods of
3
fl exible rubber seal that interfaces with aluminum grade 2, / 8" [10] diameter threaded steel all-rod provided
3
Adjustable Wall Jamb. The wall jamb shall be permanently with / 8" [10] serrated steel nuts.
mounted to a structural wall surface and is fi eld adjustable 2. Optional Direct Mount: consists of / 8” [10] x 3” [76]
3
to compensate for out-of-plumb conditions of the fi xed wall. lag screws for attachment to a level overhead structural
One (1) side of the fi nal closure panel shall contain a pull (wood or steel) support.
handle. (Refer to Part 2.05 "B. Pull Handle Finish".)
3
3. Optional Drop Rod Bracket Mount: consisting of / 8” [10]
2.08 ACOUSTICAL PERFORMANCE thick steel brackets mounted to top fl ange of track and
supported with adjustable rods of grade 2, / 8” [10]
3
A. Certifi cation: The operable wall shall have been tested in an diameter threaded steel all-rod provided with / 8” [10]
3
independent acoustical testing laboratory in accordance with serrated steel nuts.
ASTM E 90 and ASTM E 413 test procedures.
B. STC Rating: The operable wall acoustical performance rating
shall be based on (select):
1. Standard acoustical substrate: with a standard rating of 35
STC

2.08 PANEL ACCESSORIES
A. Accessories including a Floor Guide Channel shall be
compatible with other accessories and options, furnished by
KWIK-WALL as noted on submitted shop drawings.
1. Floor Guide Channel: consisting of a clear anodized extruded
aluminum channel that is recessed into the fl oor (fl ush with
fi nished fl oor) to provide additional stability to panels as
they are moved in and out of their storage location.

2.09 TRACK SYSTEM
A. The KWV-Tec TRIMMED glass wall track system shall
be extruded from structural aluminum alloy, which prohibits
deterioration caused by rust or corrosion. The aluminum track
shall have a durable anodized clear satin fi nish, which resists
color fading and fl aking. The track shall utilize grooves and
interlocking steel pins for positive alignment of adjacent track
sections. The track joints shall be reinforced overhead by a
3
heavy-duty steel bracket made of hot-rolled, / 8” [10] thick
plate steel. Aluminum track shall include an integral nut slot
to accept a hardened steel square nut to facilitate attachment
of each threaded steel all-rod and splice brackets to the
overhead structural support.
B. Track Size: The track size shall be Type 425 Multi-Directional
Aluminum Track: certifi ed to be capable of supporting up to
425 lbs. ( 193 kg ) of total live load weight per panel. 4

05-18
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com