Page 36 - LEŽAJEVI OSOVINE KLANN

Kapitel_3.fm Seite 112 Freitag, 7. April 2017 10:54 10

Axle Repairs
Wheel Hub Bearing Units, Opel / Volvo / Ford / Mazda

KL-0040-87
KL-0040-87
Wheel Bearing Removal Tool Kit
with Hydraulic Cylinder (17t), Opel/Vauxhall Insignia
KL-0040-870
Designed for the compact wheel hub bearing units found at the front and rear
axle of Opel/Vauxhall Insignia models from 2008 onwards.
The KL-0040-87 wheel bearing tool is used in conjunction with a hydraulic pump (such
as KL-0215-35 M25 or KL-0215-37 M25), thus allowing for the quick and trouble-free
KL-0040-871
removal of flanged one-piece compact wheel hub bearing units from the front and rear
axle. Even severely seized wheel bearings are no longer an issue using the KL-0040-2500
hydraulic cylinder (17t). The removal of the steering knuckle/stub axle is not necessary.
Scope of Delivery: KL-0040-87 Wheel Bearing Removal Tool Kit with Hydr. Cyl.
Part No. Description Qty
KL-0040-870 Wheel Bearing Removal Tool Kit without Hydraulic Cylinder 1
3 Scope of Delivery: KL-0040-870 Wheel Bearing Removal Tool Kit without Hydr. Cyl.
1
KL-0040-2500
Hydraulic Cylinder (17t)
Part No. Description Qty
KL-0040-871 Upgrade Kit to Wheel Bearing Removal Tool Kit 1
KL-0039-1002 Retaining Adaptor for Clamping Nut 1
KL-0039-1920-1 Pull Spindle, M20 1
KL-0039-1920-4 Clamping Nut, Ø 38mm 1
Scope of Delivery: KL-0040-871 Upgrade Kit for Wheel Bearing Removal Tool Kit
Part No. Description Qty
KL-0040-8701 Clamping Jaw with Thread 1
KL-0040-8702 Clamping Jaw without Thread 1
KL-0040-8703 Bolt 1
KL-0040-8704 Cheese Head Screw, M10x35mm 1
KL-0040-8612 A Pressure Ring, Ø 210mm 1
KL-0039-1506 Centring Ring, Ø 60mm 1

KL-0041-46 D
KL-0041-46 D
Wheel Bearing Tool
with Hydraulic Cylinder, Volvo/Ford/Mazda
KL-0041-460 D
Suitable for vehicles with bearing Ø of 78mm; e.g. Ford Focus II, C-Max (10/03
onwards); Mazda 3 (from 10/03 to 06/09) Volvo C30, C70 II, S40 II, V50; and bearing-Ø
82mm; e.g. Ford S-Max (2006 onwards), Galaxy (2006 onwards), Mondeo IV (2006
onwards); Volvo S60 II, S80 II, V60, V70 III (10/2007 onwards), XC60, XC70 II.
KL-0041-461 D
Designed for the quick and safe installation of wheel hub bearing units in-situ on the
vehicle. Due to its special design, the tool ensures that while installing the unit the
applied pressing force is distributed on the outer bearing race only, and not on the wheel
hub. This prevents damage to the bearing. Professional installation of wheel hub bearing
units is almost impossible without the use of this tool kit.
Scope of Delivery: KL-0041-46 D Wheel Bearing Tool with Hydraulic Cylinder
Part No. Description Qty
KL-0040-2500 Hydraulic Cylinder,17t 1
KL-0041-460 D Wheel Bearing Tool without Hydraulic Cylinder, Volvo/Ford/Mazda 1
Scope of Delivery: KL-0041-460 D Wheel Bearing Tool without Hydraulic Cylinder
Part No. Description Qty
KL-0041-461 D Upgrade Kit, Volvo 1
KL-0039-1002 Retaining adaptor for clamping nut and pressure spindle with O-ring 1
KL-0039-1003 Retaining adaptor for hydraulic cylinder with O-ring 1
KL-0039-1920-1 Pull Spindle, M20 1
KL-0040-3009 Clamping Nut 1
Scope of Delivery: KL-0041-461 D Upgrade Kit for Wheel Hub Bearing Unit Installation
Part No. Description Qty
KL-0041-4600 D Clamping Jaws (pair), Ø 78mm 1
KL-0041-4607 Housing 1
E wheel hub-/bearing unit insertion
KL-0041-4608 D Cover 1
Note: KL-0039-1288 Pressure Ring, Ø 88mm 1
• To remove wheel hub bearing units, the wheel hub puller KL-0041-38 is KL-0041-3931 Pressure Screw, M14x1.5 5
required. KL-0041-4601 Guide Sleeve, Ø 29.5mm 1
• To drive the hydraulic cylinder KL-0040-2500, a hydraulic pump is KL-0039-1272 Pressure Ring, Ø 72mm 1
required.
KL-0041-4602 Guide Sleeve, Ø 26.3mm 1
KL-0039-1682 Pressure/Support Sleeve, short, Ø 82mm 1

3.3-09 (112) Copyright GEDORE Automotive GmbH, Germany
formerly