Page 31 - LEŽAJEVI OSOVINE KLANN

Kapitel_3.fm Seite 107 Freitag, 7. April 2017 10:54 10

Wheel Hub Bearing Units, VW-Audi

KL-0041-380 K KL-0041-380 K
Wheel Hub Puller, without Hydr. Cyl.,
in a Plastic Storage Case

Wheel hub bearing units or wheel hubs having a diameter of up to 250mm can be
extracted quickly, safely and professionally by using the KL-0041-380 wheel hub
puller. For this, the hydraulic cylinder KL-0040-2500 and pull spindle M20x550mm
KL-0039-1920-1 are necessary.
Note:
The plates KL-0041-3821 and KL-0041-3822 are used as spacer/adjustment plates. They are
necessary when, while extracting a wheel hub, the support takes place via the bottom side of the
hooks and if the supporting surface is not even.
Scope of Delivery: KL-0041-380 K Wheel Hub Puller, without Hydraulic Cylinder
Part No. Description Qty
KL-0041-380 E Wheel Hub Puller, without Hydraulic Cylinder, in a Foam Insert 1
KL-4999-1391 Plastic Storage Case 1 3
Scope of Delivery:KL-0041-380 E Wheel Hub Puller, without Hydraulic Cylinder
Part No. Description Qty
KL-0041-380 Wheel Hub Puller, without Hydraulic Cylinder 1
KL-4999-1315 Foam Insert 1
Scope of Delivery: KL-0041-380 Wheel Hub Puller, with Adjusting Spindle
Part No. Description Qty
KL-0041-3800 Wheel Hub Puller (Base Tool with Adjusting Spindle) 1
KL-0041-3802 Adaptor, M42x2 1
KL-0039-1920-4 Clamping Nut, Ø 38mm 1
KL-0041-3812 Clamping Nut, Ø 30mm 1
KL-0041-3821 Plate with Magnet, 4mm 1
KL-0041-3822 Plate with Magnet, 6mm 1

KL-0041-42 (Patented) KL-0041-42
Wheel Bearing Tool with Hydr. Cyl.,

Audi A2/VW Lupo, (Bearing Ø 62mm)
Suitable for vehicles with bearing Ø of 62mm, e.g. Audi A2, VW Lupo etc. KL-0041-420
The KL-0041-42 wheel bearing tool set enables the quick and safe installation of
wheel hub bearing units without the risk of damaging these.
Note:
• The wheel hub puller KL-0041-38 is needed for removing wheel hub- /bearing units.
• A hydraulic pump is necessary to drive the hydraulic cylinder KL-0040-2500.
Scope of Delivery: KL-0041-42 Wheel Bearing Tool with Hydraulic Cylinder,
KL-0041-421
Audi A2/VW Lupo, (Bearing Ø 62mm)
Part No. Description Qty
KL-0040-2500 Hydraulic Cylinder, 17t 1
KL-0041-420 Wheel Bearing Tool, Lupo (Ø 62mm), without hydraulic cylinder 1
Scops of Delivery: KL-0041-420 Wheel Bearing Tool without Drive,
Audi A2/VW Lupo, (Bearing Ø 62mm)
Part No. Description Qty
KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 1
KL-0039-1003 Retaining Adaptor with O-Rings, for Hydraulic Cylinder 1
KL-0039-1920-1 Pull Spindle, M20 1
KL-0040-3009 Clamping Nut 1
KL-0041-421 Upgrade Kit, Lupo, Ø 62mm 1
Scope of Delivery:
KL-0041-421 Upgrade Kit, Audi A2/VW Lupo, (bearing-Ø 62mm)
Part No. Description Qty
KL-0041-4200 Clamping Shells (Pair), Ø 62mm 1
KL-0041-3921 Pressure Screw, M12x1.5 4
KL-0039-1265 Pressure Ring, Ø 65mm 1
KL-0039-1359 Centring Ring, Ø 59mm 1 E Wheel hub-/bearing unit insertion
KL-0041-4204 Pressure- /Support Sleeve 1

Copyright GEDORE Automotive GmbH, Germany (107) 3.3-04
formerly