Page 26 - LEŽAJEVI OSOVINE KLANN

Kapitel_3.fm Seite 102 Freitag, 7. April 2017 10:54 10

Axle Repairs
Wheel Hub Bearing Units (screw-fitted), VW-Audi / Ford

KL-4014-4224
KL-4014-4224
Bi-Hex Socket, 24mm

Applicable to VW Golf (VI, VII), Scirocco, Tiguan, Touran, Passat (3C), Passat CC;
Audi A3, TT; Seat Leon, Altea; Škoda Oktavia (1Z), Superb (3T) etc.
This socket is needed for the loosening/tightening of lock nuts/screws as found on
rear and front axle drive shafts, wheel bearings, as well as on gearbox/differential
flanges. The ideal tool to loosen/tighten the drive shaft central fastening screw on
VW-Audi, Seat, Škoda vehicles.

Technical Data:
Accessories (on demand): Drive: 3/4"
Length: 90mm
1993 U-20 CODE:1436686 - Reversible ratchet Size (waf): 24mm
Profile: bi-hex
DMK 200 CODE:2641240
3 Torque Wrench Dremaster 40-200Nm

KL-0040-86
KL-0040-86
Wheel Bearing Tool Set

with Hydraulic Cylinder (28t), Ford Transit
Suitable for all the Ford Transit models from 2002 onwards equipped with brake
disc fastening screws with pitch circle diameter 97.5 and 111mm, as well as for
KL-0040-860
Tourneo front axle on vehicles with front or rear wheel drive.
To replace the specified brake discs or wheel bearings, it is usually necessary to pull
out the wheel bearing along with the hub and brake disc from the wheel bearing
housing. This tool set allows the removal and installation of the wheel bearing to be
carried out in situ on the vehicle within a few minutes, without having to dismount
the wheel bearing housing.
Note:
A hydraulic pump such as KL-0215-35 M28 is required to drive the hydr. cyl. KL-0040-2800.

Scope of Delivery: KL-0040-86 Wheel Bearing Tool Set with Hydr. Cyl. (28t)
Part No. Description Qty
KL-0040-860 Wheel Bearing Tool Set, without Hydraulic Cylinder (28t) 1
KL-0040-2800 Hydraulic Cylinder (28t) 1
KL-0040-2812-1 Pull Spindle, M24x590mm 1
KL-0040-2812-2 Clamping Nut, M24, Ø 42mm 1
Scope of Delivery: KL-0040-860 Wheel Bearing Tool Set without Hydr. Cyl.
Part No. Description Qty
KL-0040-8601 Pressure Disc, Ø 77mm 1
KL-0040-8602 Pressure Disc, Ø 68mm 1
KL-0040-8501 A Pressure Ring 1
E Mounting the wheel bearing onto the hub
KL-0039-1823-4 Cheese Head Screw, M10x120mm 5
KL-0040-8503 Mandrel 5

KL-0040-861
KL-0040-861
Upgrade Kit,
Ford Transit Rear Axle

Suitable for Ford Transit (from 2006 onwards) rear axle, with front wheel drive.
For removing the brake disc from wheel hub bearing units. Used in conjunction with
wheel bearing tool set KL-0040-86.
Scope of Delivery: KL-0040-861 Upgrade Kit, Ford Transit Rear Axle
Part No. Description Qty
KL-0040-8611 Pressure Disc, Ø 93mm 1
KL-0040-8612 Pressure Ring, Ø 186mm 1

3.2-07 (102) Copyright GEDORE Automotive GmbH, Germany
formerly