Page 24 - LEŽAJEVI OSOVINE KLANN

Kapitel_3.fm Seite 100 Freitag, 7. April 2017 10:54 10

Axle Repairs
Wheel Hub Bearing Units (screw-fitted), VW-Audi

KL-0049-320
KL-0049-320
Wheel Bearing Puller,
Audi/Seat/Škoda/VW

Suitable for Audi A3 (8P); Seat Altea (5P), Leon (1P); Škoda Oktavia estate car
(1Z); VW Eos, Passat (3C), Golf V, Tiguan and Touran.
Flange-mounted compact wheel bearings (bearing Ø 85mm) can easily and smoothly
be extracted from the steering knuckle with the aid of the KL-0049-320 wheel
bearing puller in conjunction with the slide hammer KL-0049-31 or KL-0049-300.
Removal of the steering knuckle is not necessary.
Scope of Delivery: KL-0049-320 Wheel Bearing Puller, Audi/Seat/Škoda/VW
Part No. Description Qty
KL-0049-3200 Pull Spindle 1
3 KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 2 1
KL-0039-1266
Pressure Ring, Ø 66mm
KL-0039-1506 Centring Ring, Ø 60mm 1
KL-0040-3009 Clamping Nut 1

KL-0049-330
KL-0049-330
Wheel Bearing Puller, Audi
Applicable to Audi A4 (8E), A6 (4B) and A8 (4D).
The wheel hub and the flange-mounted compact wheel bearing (bearing Ø 85mm)
can easily and smoothly be extracted from the steering knuckle by using the wheel
bearing puller KL-0049-330 in conjunction with slide hammer KL-0049-31 or
KL-0049-300. Removal of the steering knuckle is not necessary.
Note: With an already existing KL-0049-320 wheel bearing puller, you will need for Audi A4 only
pressure ring KL-0039-1282 and clamping nut KL-0039-1920-4.
Scope of Delivery: KL-0049-330 Wheel Bearing Puller, Audi
Part No. Description Qty
KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 2
KL-0039-1266 Pressure Ring, Ø 66mm 1
KL-0039-1281 Pressure Ring, Ø 81mm 1
KL-0049-3200 Pull Spindle 1
KL-0039-1920-4 Clamping Nut 1
KL-0039-1273 Pressure Ring, Ø 73mm 1

KL-0049-31
KL-0049-31
Slide Hammer Puller (4.8kg),

with Adaptor 2 1/4“-14 UNS to M18

Designed to extract wheel hubs, half-shafts, drive shafts, brake drums etc.
Used in conjunction with the KL-0174-.. Puller Series.
Technical Data:
Hammer weight: 4.8kg
Length: 690mm
Connection thread on pull rod: M18
Scope of Delivery:
KL-0049-31 Slide Hammer Puller, 4.8kg, with Adaptor 2¼“-14 UNS to M18
Part No. Description Qty
KL-0049-3001 Pull Rod for KL-0049-3 1
KL-0049-3002 Hammer Weight (4.8kg) for KL-0049-3 1
KL-0049-3003 Handle for KL-0049-3 1
KL-0049-3004 Hex Nut, M18 1
KL-0174-545 Adaptor, 2¼"-14 UNS to M18 1

3.2-05 (100) Copyright GEDORE Automotive GmbH, Germany
formerly