Page 6 - UPRAVLJAČKI SISTEM KLANN

Kapitel_2.fm Seite 51 Freitag, 7. April 2017 10:13 10

KL-0039-762 KL-0039-762
Pressing Device with Hydraulic Cylinder,
BMW E36 KL-0039-7620

Designed for the BMW 3 Series (E36), front axle wishbone.
The KL-0039-762 pressing device enables the quick and trouble-free removal and
installation of the specified outer suspension ball joints that are found on the lower
wishbone.
The removal and replacement of the outer suspension ball joint can also be
performed in situ on the vehicle within just a few minutes, with the wishbone in 2
place.
Scope of Delivery:
KL-0039-762 Pressing Device with Hydraulic Cylinder, BMW E36
Part No. Description Qty
KL-0039-7620 Pressing Device without Hydraulic Cylinder, BMW E36 1
KL-0040-2500 Hydraulic Cylinder (17t) 1
KL-0039-7623
Scope of Delivery:
KL-0039-7620 Pressing Device without Hydraulic Cylinder, BMW E36
Part No. Description Qty
KL-0039-7623 Sleeve Set, BMW E36 1
KL-0039-1140 Press Frame (lightweight, short) 1
KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 1
KL-0039-1930 Pressure Spindle with O-Ring, M20x350 1
Scope of Delivery:
KL-0039-7623 Sleeve Set, BMW E36
Part No. Description Qty
KL-0043-8288-1 Pressure Sleeve for BMW E36 1
KL-0043-8289-1 Support Sleeve for BMW E36 1
KL-0039-1648 Pressure/Support Sleeve, short, Ø 48mm 1
KL-0039-1658 Pressure/Support Sleeve, short, Ø 58mm 1

Copyright GEDORE Automotive GmbH, Germany
formerly