Page 11 - UPRAVLJAČKI SISTEM KLANN

Kapitel_2.fm Seite 56 Freitag, 7. April 2017 10:13 10

Steering System/Geometry

KL-0039-753
KL-0039-753 (Patented)
Pressing Device with Hydraulic Cylinder,

KL-0039-7530 Mercedes Sprinter (W906)/
VW Crafter (2E/2F)

Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter
(2E/2F) from 2006 onwards, suspension ball joint on the front lower wishbone.
Used in conjunction with hydraulic pump KL-0215-35 M25 or KL-0215-37 M25, the
KL-0039-753 pressing device, enables suspension ball joints to be pressed into and
2
pressed out from the lower wishbone quickly and without any trouble. Removal and
installation of the suspension ball joints can be carried out in situ on the vehicle.
KL-0039-7533 Scope of Delivery:
KL-0039-753 Pressing Device with Hydraulic Cylinder,
Mercedes Sprinter (W906)/VW Crafter (2E/2F)
Part No. Description Qty
KL-0039-7530 Pressing Device without Hydraulic Cylinder, MB Sprinter 1
KL-0040-2500 Hydraulic Cylinder (17t) 1
KL-0039-7534
Scope of Delivery:
KL-0039-7530 Pressing Device without Hydraulic Cylinder,
Mercedes Sprinter (W906)/VW Crafter (2E/2F)
Part No. Description Qty
KL-0039-7533 Sleeve Set, Mercedes Sprinter (W906)/VW Crafter (2E/2F) 1
KL-0039-1140 Press Frame, lightweight, short 1
KL-0039-1002 Retaining Adaptor for Clamping Nut and Pressure Spindle 1
KL-0039-1930 Pressure Spindle, M20x350mm 1

Scope of Delivery:
KL-0039-7533 Sleeve Set, Mercedes Sprinter, (W906)/VW Crafter (2E/2F)
Part No. Description Qty
KL-0039-7534 Support Sleeve with Clamping Washer 1
KL-0039-1829 Pressure Sleeve 1
KL-0039-1762 Pressure Sleeve, Ø 62mm, long 1
KL-0039-1662 Support Sleeve, Ø 62mm, short 1
Scope of Delivery:
KL-0039-7534 Support Sleeve with Clamping Washer,
Mercedes Sprinter (W906)/VW Crafter (2E/2F)
Part No. Description Qty
KL-0039-1823-3 Clamping Washer 1
KL-0039-1828-1 Support Sleeve for Shoulder Ø 60mm 1
KL-0039-1823-4 Cheese Head Screw, M10x120mm 1
KL-0039-1823-5 Spacer Tube 1

KL-0039-7523
KL-0039-7523
Sleeve Set,
Mercedes 190 Series (W201), W124, W129
Suitable for the Mercedes 190 Series (W201), W124 and W129, suspension ball
joint at the front lower wishbone.
Used in conjunction with a hydraulic drive, the KL-0039-7523 sleeve set enables a
suspension ball joint to be pressed into and pressed out of the lower wishbone
quickly and with ease. Removal and installation of the specified ball joint can be
carried out in situ on the vehicle within just a few minutes, without the need for
dismantling the wishbone.
Scope of Delivery:
KL-0039-7523 Sleeve Set , Mercedes 190 Series (W201), W124, W129
Part-No. Description Qty
KL-0039-1636 Pressure/Support Sleeve, short, Ø 36mm 1
KL-0039-1658 Pressure/Support Sleeve, short, Ø 58mm 1
KL-0039-1760 Pressure/Support Sleeve, long, Ø 60mm 1

Copyright GEDORE Automotive GmbH, Germany
formerly