Page 12 - UPRAVLJAČKI SISTEM KLANN

Kapitel_2.fm Seite 57 Freitag, 7. April 2017 10:13 10

KL-0039-710 KL-0039-710
Pressing Device with Hydraulic Cylinder
KL-0039-7100
Suitable for Renault Master II (1998 onwards) and Opel Movano I (1998 onwards),
front axle.
Used in conjunction with the hydraulic pump KL-0215-35 M25 or KL-0215-37 M25, the
pressing device KL-0039-710 allows for the quick, professional and safe removal and
installation of the suspension ball joints on the front upper and lower wishbone.
This tool enables even heavily corroded/seized ball joints to be pushed out and replaced
within just a few minutes. The removal of the upper or lower wishbone is not necessary.
2
Advantages:
• Substantial time savings of approx. 1-2 hours KL-0039-712
• Quick and professional removal/installation of the suspension ball joints KL-0039-722
• Hydraulic Cylinder (17t) KL-0040-2500 can universally be used on other GEDORE
Automotive tools to exert pulling or pushing force.
Scope of Delivery: KL-0039-710 Pressing Device with Hydraulic Cylinder
Part-No. Description Qty
KL-0039-7100 Pressing Device without Hydraulic Cylinder 1 KL-0039-723
KL-0040-2500 Hydraulic Cylinder (17t) 1
Scope of Delivery: KL-0039-7100 Pressing Device without Hydraulic Cylinder
Part No. Description Qty
KL-0039-1140 Press Frame (lightweight, short) 1
KL-0039-1930 Pressure Spindle, M20x350, with O-Ring 1
KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 1
KL-0039-712 Sleeve Set, Renault Master II/Vauxhall/Opel Movano I 1
Scope of Delivery: KL-0039-712 Sleeve Set, Renault Master II; Opel/Vauxhall Movano I
Part-No. Description Qty
KL-0039-722 Sleeve Set, Renault Master, Upper Suspension Ball Joint 1
KL-0039-732 Sleeve Set, Renault Master, Lower Suspension Ball Joint 1
Scope of Delivery: KL-0039-722 Sleeve Set, Upper Suspension Ball Joint
Part No. Description Qty
KL-0039-1644 Pressure/Support Sleeve, short, Ø 44mm 1
KL-0039-1764 Pressure/Support Sleeve, long, Ø 64mm 1
KL-0039-1820 Support Sleeve for Renault Master 1
KL-0039-1758 Pressure/Support Sleeve, long, Ø 58mm 1
Scope of Delivery: KL-0039-732 Sleeve Set, Lower Suspension Ball Joint
Part-No. Description Qty Removing Installing
Installing
KL-0039-1821 Pressure/Support Sleeve 1 the upper the upper Removing the lower
the lower
KL-0039-1658 Pressure/Support Sleeve, short, Ø 58mm 1 ball joint ball joint ball joint ball joint
KL-0039-1652 Pressure/Support Sleeve, short, Ø 52mm 1
KL-0039-1822 Pressure/Support Sleeve 1
KL-0711-11 L KL-0711-11 L

Pressing Device with Hydraulic Cylinder
Designed for Volvo S40/V40, front axle wishbone.
Allows for the quick and easy removal and replacement of suspension ball joints. The ball KL-0711-110 L
joints can be removed and installed in situ on the vehicle within just a few minutes, without
having to dismount the wishbone. This tool enables even heavily corroded/seized ball
joints to be pushed out and replaced quickly and without any trouble.
Scope of Delivery: KL-0711-11 L Pressing Device with Hydr. Cyl., Volvo S40/V40
Part No. Description Qty
KL-0711-110 L Pressing Device without Hydraulic Cylinder, Volvo S40/V40 1
KL-0040-2500 Hydraulic Cylinder, 17t 1
Scope of Delivery: KL-0711-110 L Pressing Device without Hydr. Cyl., Volvo S40/V40
KL-0711-111
Part No. Description Qty
KL-0039-1140 Press Frame, short 1
KL-0711-111 Sleeve Set, Volvo S40/V40 1
KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 1
KL-0039-1930 Pressure Spindle, M20x350mm, with O-Ring 1
Scope of Delivery: KL-0711-111 Set of Sleeves, Volvo S40/V40
Part No. Description Qty
KL-0711-1111 Pressure/Support Sleeve, short, Ø 38mm 1
KL-0039-1754 Pressure/Support Sleeve, long, Ø 54mm 1
KL-0039-1750 Pressure/Support Sleeve, long, Ø 50mm 1
KL-0039-1654 Pressure/Support Sleeve, short, Ø 54mm 1

Copyright GEDORE Automotive GmbH, Germany
formerly