Page 14 - UPRAVLJAČKI SISTEM KLANN

Kapitel_2.fm Seite 59 Freitag, 7. April 2017 10:13 10

KL-0250-41 KA KL-0250-41 KA
Extractor with Extraction Device
for Clamping Bolt, Audi A4/A6

Suitable for Audi A4 (8E) and A6 (2004 onwards). Essential tool for the
professional extraction of the upper wishbone pivot pin clamping bolt from the
steering knuckle clamping bore.
The extractor KL-0250-41 KA with its proper pressure unit and extraction device,
enables the quick and professional extraction of hex clamping bolts. The extraction 2
device is used to pull out the loosened hex clamping bolt.
The tool is suitable for both right-hand and left-hand wheel suspensions.
Example of use: Technical Data:
• Mount extractor with pressure unit and fixing unit to steering knuckle. Weight: 8.2kg
• Screw in the hex nut of the pressure unit using special socket (24mm waf) and a
1/2“ impact wrench. The hex clamping bolt is pressed out. The loosening process
takes place with a loud noise.
• Remove extractor. Mount extraction device to extract the loosened clamping bolt.
• Screw in the hex nut of the extraction device using the special socket (24mm waf)
and remove the hex clamping bolt completely.

Advantages:
• High cost savings.
• Substantial time savings of approximately 2-3 hours.
• No risk of damage to suspension components.

Scope of Delivery:
KL-0250-41 KA Extractor with Extraction Device for Clamping Bolt Audi A4 / A6
Part No. Description Qty
KL-0250-410 Extractor for Clamping Bolt 1
KL-0250-417 Upgrade Kit, Audi A6 1
KL-0250-4190 Plastic Storage Case 1

KL-0250-42 KL-0250-42
Pivot Pin Removal Tool

Suitable for Audi A4 (2001 onwards) and Audi A6 (2004 onwards).
This tool is designed to punch out pivot pins from wishbone struts.

KL-0250-43 K KL-0250-42
Drill-Out Tool Kit for Strut Bolts, Audi

Applicable to Audi A4 (8E, 8H, 8K); A5 (8T); A6 (4B, 4G, 4F); Q5 (8R), A7 (4GA,
4GF), A8 (4D) and Seat Exeo (3R2, 3R5) with aluminium steering knuckle.

The KL-0250-43 K drill-out tool kit allows the user to professionally drill out upper
strut clamping bolts as found on aluminium steering knuckles. An indispensable tool
kit when clamping bolts are a tight fit or seized in place. When drilling out strut bolts
on steering knuckles with low-mounted steering gear, the steering knuckle needs to
be locked in fully turned position by means of the clamping device that comes with
the kit. This will prevent damage to the mudguard. The use of this tool kit eliminates
the need for cost-intensive replacement of the complete steering knuckle with wheel
bearing unit.

Copyright GEDORE Automotive GmbH, Germany (59) 2-15
formerly