Page 10 - UPRAVLJAČKI SISTEM KLANN

Kapitel_2.fm Seite 55 Freitag, 7. April 2017 10:13 10

KL-0039-750 (Pat. e.g. US-Patent 7,020,944) KL-0039-750
Pressing Device with Hydraulic Cylinder,
Mercedes Sprinter/VW LT (2D)
KL-0039-7500
Designed to change suspension ball joints on Mercedes Sprinter (901-904)
models from 1995-2006 and on VW LT (2D) models from 1996-2006.
Used in conjunction with the hydraulic pump KL-0215-35 M25 or KL-0215-37 M25,
the pressing device KL-0039-750 enables the quick and trouble-free pushing out 2
and pressing in of the suspension ball joint on the lower wishbone. Removal and
installation of the ball joints can be performed in situ on the vehicle within a just few
minutes, without having to dismantle the wishbone.

KL-0039-7503
Note:
Mercedes Sprinter and VW LT are fitted with two different wishbones with two different
suspension ball joints.
Scope of Delivery: KL-0039-750 Pressing Device with Hydraulic Cylinder,
Mercedes Sprinter/VW LT (2D)
Part-No. Description Qty
KL-0039-7500 Pressing Device without Hydraulic Cylinder, Mercedes Sprinter 1
KL-0040-2500 Hydraulic Cylinder (17t) 1

Scope of Delivery: KL-0039-7500 Pressing Device without Hydraulic Cylinder,
Mercedes Sprinter/VW LT (2D)
Part No. Description Qty
KL-0039-7503 Sleeve Set, Mercedes Sprinter 1
KL-0039-1140 Press Frame, (lightweight, short) 1
Retaining Adaptor with O-Rings, for Clamping Nut and Pressure
KL-0039-1002 1
Spindle
KL-0039-1930 Pressure Spindle, M20x350, with O-Ring 1

Scope of Delivery:
KL-0039-7503 Sleeve Set, Mercedes Sprinter/VW LT (2D)
Part No. Description Qty
KL-0039-1823 Support Sleeves with Clamping Disc for Mercedes Sprinter 1
KL-0039-1662 Pressure/Support Sleeve, short, Ø 62mm 1
KL-0039-1762 Pressure/Support Sleeve, long, Ø 62mm 1
KL-0039-1824 Pressure Sleeve 1 E Ball joint extraction E Ball joint insertion

KL-0039-7535 (Pat. e.g. US-Patent 7,020,944) KL-0039-7535

Upgrade Kit for KL-0039-750,
MB Sprinter (W906)/VW Crafter (2E/2F)

Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter
(2E/2F) from 2006 onwards, suspension ball joints on the front lower wishbone.

The upgrade kit KL-0039-7535 enables the pressing device KL-0039-750 also to be
used on Mercedes Sprinter (W906) models from 2006 onwards and VW Crafter (2E/2F)
models from 2006 onwards.

Scope of Delivery:
KL-0039-7535 Upgrade Kit for KL-0039-750, Mercedes Sprinter /VW Crafter
Part No. Description Qty
KL-0039-1828-1 Support Sleeve for Shoulder Ø 60mm 1
KL-0039-1829 Pressure Sleeve 1

Copyright GEDORE Automotive GmbH, Germany
formerly