Page 10 - Barkev Product Catalogue

GR

BARKEV PRINT CONSULTANTS
BARKEV COATINGS CC CK 1988/018503/23 GRAVURE, FLEXO, LITHO
HEAD OFFICE PH: 087 353 9740 / 031 020 0120 FAX: 031-701 3329 TECHNICAL & SALES
CAPE TOWN PH: 021- 558 3454 FAX: 021- 558 8683
GAUTENG PH:087 353 9642 FAX: 086 512 4091 CK 2005/075076/23
www.barkev.co.za

R QUALITÉ - COMPÉTENCE - SERVICE
QUALITY - COMPETENCE - SERVICE
QUALITÄT - KOMPETENZ - KUNDENDIENST

14 CORROPLAST BLADE 9910

PLASTIC DOCTOR BLADE FOR CORRUGATED PRINTING

OPTIONS SHIM

* Available in vrious widths and CORROPLAST BLADES
thicknesses to meet your
requirements. PLASTIC DOCTOR BLADES FOR CORRUGATED PRINTING

* Also available with bevel (i.e. for PRODUCT DESCRIPTION
containment blade).
CORROPLAST BLADE is a doctor blade that performs similar to
PRINTING QUALITY steel equivalents. Used blades can be recycled due to their plastic
content.
* Same as steel with the whole range
of screens. TYPICAL PROPERTIES

* No more running in. * Performance equivalent to steel blades
* Lasts 3 to 5 times longer than steel
ECONOMY * No anilox wear
* Eradicates risk of cuts
* CORROPLAST BLADE lasts 3 to 5 * Can be recycled due to plastic content
times longer than steel! Now you will
be able to avoid frequent and costly DIRECTIONS FOR USE
down time to change the doctor
blades. * Cut one or two lengths (ink chamber top and bottom) to
the proper dimensions.
* CORROPLAST BLADE is price
competitive. * Install CORROPLAST BLADE with the sharp side
facing the anilox whatever the rotation direction may be.
SAFETY
* Install the shims below the clamp screws to compensate
* CORROPLAST BLADE eradicates for the thicker blade and prevent any blade vibrations.
the risk of cutting while changing the
blades or washing the doctor blade * Check blade alignment and tighten clamp screws.
holder system. * Pass your finger over the bevel to detect defects. Slight

ENVIRONMENT roughness will vanish after running-in.
* In case of small notches you can restore the bevel with a
* You can recycle the old doctor
blades because they are plastic. low lighter flame.
* Print with the lowest contact pressure.
HOW TO USE IT * Never run without ink.

* Install and use it like a classic steel AYM (031) 7085002
blade.

* CORROPLAST BLADE is
delivered in 30m rolls in its special
packaging.

197-30