Page 9 - Barkev Product Catalogue
P. 9
GR
BARKEV PRINT CONSULTANTS
BARKEV COATINGS CC CK 1988/018503/23 GRAVURE, FLEXO, LITHO
TECHNICAL & SALES
HEAD OFFICE PH: 087 353 9740 / 031 020 0120 FAX: 031-701 3329
CAPE TOWN PH: 021- 558 3454 FAX: 021- 558 8683
GAUTENG PH:087 353 9642 FAX: 086 512 4091
www.barkev.co.za
R QUALITÉ - COMPÉTENCE - SERVICE
QUALITY - COMPETENCE - SERVICE
QUALITÄT - KOMPETENZ - KUNDENDIENST
13 FLEXOPLAST 9910
THE PLASTIC DOCTOR BLADE OF THE FUTURE
SHIM
PRINTING QUALITY FLEXOPLAST
* Same as steel with the whole range PLASTIC DOCTOR BLADES OF THE FUTURE
of screens.
PRODUCT DESCRIPTION
* No more running in.
FLEXOPLAST is a plastic doctor blade that performs similar to steel
ECONOMY equivalents. Used blades can be recycled due to their plastic content.
* FLEXOPLAST runs 5 to 10 times TYPICAL PROPERTIES
longer than steel! Now you will be
able to avoid frequent and costly * Performance equivalent to steel blades
down time to change the doctor * Lasts 5 to 10 times longer than steel
blades. * No anilox wear
* Eradicates risk of cuts
* FLEXOPLAST is price competitive. * Can be recycled due to plastic content
SAFETY DIRECTIONS FOR USE
* FLEXOPLAST eradicates the risk of * Cut one or two lengths (ink chamber top and bottom) to
cutting while changing the blades or the proper dimensions.
washing the doctor blade holder
system. * Install FLEXOPLAST with the hollow side away from the
ENVIRONMENT anilox whatever the rotation direction may be.
* Install the shims below the clamp screws to compensate
* You can recycle the old doctor
blades because they are plastic. for the thicker blade and prevent any blade vibrations.
* Check blade alignment and tighten clamp screws.
HOW TO USE IT * Remove bevel protection strip and wipe with a soft cloth.
* Pass your finger over the bevel to detect defects. Slight
* Install and use it like a classic steel
blade. roughness will vanish after running-in.
* In case of small notches you can restore the bevel with a
* FLEXOPLAST is delivered in 30m
rolls in its special packaging. low lighter flame.
* Print with the lowest contact pressure.
696-26 * Never run without ink.
AYM (031) 7085002
