Page 4 - Rear Drum Rebuild

Picture 8 - The adjuster arm is set into place with the orange spring ready to be hooked in. With the special red tool push the spring down and
twist while holding the pin on the back side. It will lock into place. This tool helps grip the spring and allows the top washer to be twisted and
locked in place with little effort.

Picture 9 - Now install the small red spring at the base of the adjuster and hook the 2 shoes together with the other red spring with the cylinder
adjuster between the shoes. The teeth of the adjuster will line up in front of the hole in the backing plate. Hook the brown spring from the
adjuster arm to the backing plate stud but be sure to install the washer with ears first. With the bar tool or screwdriver install the pink spring from
the shoe to the backing plate stud. This is where our other bar like tool helps secure the spring the first try.