Page 35 - Street Rod Catalog

Straight Tube with Fittings Page
35
All straight Length includes the end fittings and flared tubes
Rear discs use a If Master Cylinder is lower than any
banjo at the brake line residual valves are needed.
caliper & drum
brakes use a Front flex hose
fitting Adjustable prop. into brake line
valve always in
Brake Line Tee rear brake line Brake Line Tee
Thru Frame - Tee Thru Frame - Elbow
Some builders
will use rear axle Residual valves go as close to
the master as possible 2lb for
lines in place of Rear disc 10lb for drum Front
the crossover
but only on rear
Brake Line Elbow With routing similar to this Brake Line Elbow
you will use 25-30 ft of Hose Tab - Tee Hose Tab - Elbow
No flex line tubing, and 14-22 fittings. Front flex hose
should be longer into brake line
than 18-21"
Typical Plumbing Diagram
This is a typical diagram using tees and elbows. This is the same if using -3an or standard automotive
fittings. Typically components are pipe thread or standard fittings. The crossover from AN or Army / Navy
standard to SAE standard automotive fittings is pipe thread. All Stainless braided hoses are -AN. -AN Hose Tab - Tee -AN Hose Tab - Elbow
Stainless Steel Lengths of Tube

Length of Tube
8" 12" 20" 30" 40" 50" 60" 72"
3/16" $6.00 $7.00 $9.00 $12.00 $14.00 $16.00 $17.00 $18.00
Tube All 3/16" Tubes Come With (2) STN-1 Fittings, STN-1 3/8-24, 3/8" HEX

of 1/4" $7.00 $8.00 $10.00 $13.00 $15.00 $17.00 $18.00 $19.00
Dia. 5/16" $8.00 $9.00 $11.00 $14.00 $16.00 $18.00 $19.00 $20.00
All 1/4" Tubes Come With (2) STN-12 Fittings. STN-12 7/16-24, 7/16" HEX
Outside 3/8" All 5/16" Tubes Come With (2) STN-15 Fittings, STN-15 1/2-20, 1/2" HEX

$10.00 $12.00 $15.00 $17.00 $19.00 $20.00 $21.00
$9.00
All 3/8" Tubes Come With (2) STN-20 Fittings STN-20 5/8-18 5/8" HEX
When ordering lengths of tube part # = 3/16 (size) 30 (length) example 3/16 steel tube, 3/16 dia, 30" long.
When ordering stainless tube lengths, please place an "s" in front of the part number.
O.E.M. Steel Lengths of Tube

Length of Tube
8" 12" 20" 30" 40" 50" 60" 72"
3/16" $1.75 $2.25 $3.00 $4.00 $5.15 $6.20 $7.25 $8.50
Tube All 3/16" Tubes Come With (2) TN-1 Fittings, TN-1 3/8-24, 3/8" HEX

of 1/4" $2.25 $2.75 $3.50 $4.50 $5.50 $6.70 $7.75 $9.00
Dia. 5/16" $3.25 $3.75 $4.50 $5.50 $6.50 $7.70 $8.75 $10.00
All 1/4" Tubes Come With (2) TN-12 Fittings. TN-12 7/16-24, 7/16" HEX
Outside 3/8" All 5/16" Tubes Come With (2) TN-15 Fittings, TN-15 1/2-20, 1/2" HEX $11.00

$7.50
$8.70
$9.75
$6.50
$5.50
$4.25 $4.75
All 3/8" Tubes Come With (2) TN-20 Fittings TN-20 5/8-18 5/8" HEX
When ordering lengths of tube part # = 3/16 (size) 30 (length) example 3/16 steel tube, 3/16 dia, 30" long.
www.Inlinetube.com