Page 4 - Caliper Reubild

Again for the outer seal to work properly it must be installed in the right direction. Once you have pushed the piston in by hand, you may need a
c clamp to finish the job. The outer seal is at the end of the piston travel and requires a bit of pressure to get in place. The outer seal has a metal
ring that will fit into the caliper housing. This ring may be pushed in by hand but in some cases may need a tap since it is a tight fit. Tap in place
but do not hammer on.

Now all the hardware may be installed. The caliper pins, pin sleeves, banjo bolts, and bleeder are silver zinc. The hardware installs in a few
minutes and your caliper rebuild is done. The rebuild kit and all the hardware is available from Inline Tube. Inline Tube also carries a complete
new caliper.

Here is the restored caliper. Below is a list of all the part you will need or the finished loaded caliper is also listed for sale.