Page 224 - IGC BOOK
P. 224

used to determine compliance with National or other worker exposure limits and determine
               what controls are required to remain within the limits. Monitoring can establish if current
               controls are adequate to limit exposure and assist in choosing appropriate personal protective
               equipment (PPE). Monitoring can provide information on patterns of exposure and levels of
               risk that managers can use and provide to workers. It can also indicate the need for health
               surveillance of groups and individual workers.

               Limitations of Hazardous Substance Monitoring
               As described previously, the health effects of exposure to toxic substances can be acute or
               chronic. It is therefore necessary to use appropriate methods of measurement to distinguish
               these effects. It is also important to understand the limitation of any hazardous substance
               monitoring method used, for example, the risk of cross contamination of similar substances
               being measured and the fact that general workplace monitoring may not represent specific
               worker exposure.

               Hazardous substance monitoring of the presence of a chemical in the air may not represent
               the  worker’s  complete  exposure,  for  example  there  may  be  additional  exposure  to  the
               chemical by skin contact or orally through poor hygiene arrangements.

               One of the main limitations of hazardous substance monitoring is the competence of the
               person conducting the monitoring. It is reliant on them conducting monitoring at the time
               that  represents  real  exposure  of  workers  and  using  methods  that  will  give  reliable
               measurements.


               When carrying out monitoring related to dusts it is important to discern the amount of dust
               that can penetrate the airway and cause harm. If the person conducting the monitoring does
               not understand the difference between 'total inhalable dust' and 'respirable dust' there is a
               risk that unsuitable measurements may be taken.

               Total inhalable dust' is the amount of airborne material that enters the nose and mouth
               during breathing and is available for deposition in the body. 'Respirable dust' is the amount
               of airborne material that penetrates to the gas exchange region of the lung.


               General Approach to Hazardous Substance Monitoring
               When embarking upon a monitoring campaign to assess the risk to which an individual may
               be exposed, it is necessary to ask several questions.

               What to sample?

               This  involves  a  review  of  the  materials,  processes  and  operating  procedures  being  used
               within  a  process,  coupled  with  discussions  with  management  and  health  and  safety
               personnel.  A  brief  'walkthrough'  survey  can  also  be  useful  as  a  guide  to  the  extent  of









                 ENSIGN|                                        Unit IG2 – Element 7 – Chemical and Biological   19
                 Agents
   219   220   221   222   223   224   225   226   227   228   229