Page 34 - PIGNAT catalogue 2020 GB_092020

REACTION - SYNTHESIS

RMD/1000 ASSEMBLE AND DISASSEMBLE SS REACTOR

➢ Assembly, disassembly and testing the different parts of an
agitated reactor

Performing maintenance at different levels
Understanding and reading of PID or 3D diagrams
Selection of suitable material
Change a simple bridle
Replacing of a stirring mobile
Assembly of motor
Installation of a connection or utility

Detection of anomalies of the assembly and react accordingly
Listen to and follow the instructions
Check and control Assembly

Evaluation of skills associated with the operation
Tests in real conditions
General specifications Vacuum circuit
Look after the order and cleanliness of the workplace

www.pignat.com
www.pignat.com • Events valve. Instrumentation

• Diaphragm vacuum pump.
• Vacuum gauge.
Reactor:
SS cover with: hole of loading, agitation, tem- • Isolation valve.
perature, output from the condenser. PTFE • Adjusting valve.
gasket. Mobile thermal protection.
• Draining valve.
• Safety valve.

Stirring:
• Motor with low fixed speed.
• 2 temperature probes.
• Motor /mobile ss shafts coupling (propeller • Flowmeter
or bi-blade).

Thermoregulatory group:
• Integrated controller.
• Set of flanges and gaskets. • Manometer.

Cooling circuit:
• Pressure control.
• SS condenser and glass sight.
• Adjusting valve.
• Isolation valve.
• Connection with the capacitor. 200 - 400 V Water Drainage
3ϕ - 50/60 Hz 1000L/h
Dim: 140 x 90 x 165 cm - 130 kg

This unit allows you to assemble and disas-
semble the different elements that constitute
a reactor, to familiarize the user with the
maintenance of this type of equipment.

The user can mount the unit as a whole or a
part. Manipulations can be carried out with
water but the unit allows to the study off all
operations related to this type of
reactor.

34 Chemical engineering & unit operations