Page 52 - Final Report - KAUSC Team
P. 52
KAUSC Team
Maximum combined stress in MPa with a maximum value of 179.96 MPa.
Figure 26 Maximum combined stress
Finally, applying the analysis on the hinges used in the frame to make sure they are safe to
be used in our design. The figure below shows a sample where the hinges are going to be
located and used. It is used to hold the two front arms where the suspension and the wheels
will be mounted on in order to allow the arms to rotate about specific axis and to hold the
rear base (where the motor, batteries, drive shaft and other different components will be
mounted and located there) and allow it to rotate about a specific axis.
Figure 27 hinges for wheels
51 | P a g e
