Page 108 - Vessel Sanitation Program 2018 Construction Guidelines

VSP 2018 Construction Guidelines

29.11.3 Analyzer Probes
For WHIRLPOOL SPAS and SPA POOLS, analyzer probes for the dosing and
recording system must be capable of measuring and recording levels up to 10
MG/L (10 ppm).

29.11.4 Alarm
Provide an audible alarm in a continuously occupied watch station (e.g., the
engine control room) to indicate low and high free HALOGEN and PH readings
in each RECREATIONAL WATER FACILITY.

29.11.5 Water Feature Design
Design water features such that the water cannot be taken directly from the
compensation or make-up tank but must be first routed through filtration and
DISINFECTION systems.

29.11.6 Water Supply
Water may be taken directly from the RECREATIONAL WATER FACILITY
to supply other features within the same RECREATIONAL WATER
FACILITY.

If taken from the RECREATIONAL WATER FACILITY, consider taking the
water from the lower part of the RECREATIONAL WATER FACILITY. This
does not apply to a BABY-ONLY WATER FACILITY.

29.12 Secondary Disinfection

29.12.1 Installation
Install a secondary DISINFECTION system for each CHILDREN’S POOL,
INTERACTIVE RECREATIONAL WATER FACILITIES, and BABY-ONLY
WATER FACILITY. Refer to section 30.3 for proper equipment and
installation.

If an ACTIVITY POOL has INTERACTIVE RWF features, such as flowing,
misting, sprinkling, jetting, and waterfalls, a secondary DISINFECTION system
must be installed.

29.13 Recreational Water Facility Mechanical Room (Pump Room)

29.13.1 Accessible
Make RECREATIONAL WATER FACILITY mechanical rooms
ACCESSIBLE and well-ventilated.

29.13.2 Design
Design pump rooms so operators are not required to stoop, bend, or crawl and
so they can easily access and perform routine maintenance and duties.

92