Page 17 - scales manual v1014 web

AND HV/ HW
1. Remove the rear cover to expose the cal switch
2. Press the cal switch
3. The display will show “9.***”, this is adjustment for gravity and should not be

touched.
4. Press the MODE key to go to calibration.
5. CAL 0 will be displayed
6. With nothing on the platform, press the Zero key to store the new zero.
7. CAL 1 will be displayed, If you do not wish to adjust span press the cal switch now.
8. By using the mode key you can select between Full and 2/3 cal in English and

metric.
9. Cal 1 is Full scale KG
10. Cal 2 is 2/3 scale KG
11. Cal 3 is Full scale LB
12. Cal 4 is 2/3 scale LB
13. Place the calibration on the platform and press the ZERO key, the display will show

End, press the cal switch.

AND HV 200KGL

1. Press and Hold Cal button
2. Press Zero button
3. Press MODE button twice
4. RANGE increments flashing digit, SET moves flashing digit, key in cal weight
5. Place weight and press MODE
6. Press CAL button

AND FC

1. Open the front cover and slide the cal switch to on.
2. The display will show CAL
3. Press the ZERO key to enter into zero and span cal mode.
4. Key in the calibration mass to be used.
5. Press the enter key.
6. Once stable, press the enter key, if you do not need to Span the scale press C and

slide the cal switch.
7. For span place the cal weight entered in step 4 on the weighing pan and press the

enter key.
8. Slide the cal switch off.

AND FV/FV-WP

Same as HV/HW series except the cal switch is inside the indicator and behind a small
metal plate with thumbscrews.

© 2014 ScaleResource.com Page 17