Page 100 - final report_Neat

upstanding
beam
Normal beam

If the ground level is low the traditional casting of
beam does not allow lights to enter to the basement,
but the use of Upstanding beam allows light passing
to the basement

Points to be remember in slab design
• Proper cover of 10-12 mm should be
maintained.
• Spacing of top bars and bottom bars
should be as mentioned in drawing.
• Electrical layout before casting. Crank portion
• Crank length is 0.1 ly, lx from the end of
the beam.
• Properly placement of chair bars to
prevent collapsing and touching of upper
cage reinforcement and lower cage
reinforcement to one another
Chair bars

Bending of stirrups on
site

Placing of rebars with
proper marking.

79