Page 13 - Cortech Product Guide No8

LAMINATING

™
GsPRO LAMINATE
3" Core

Platinum TM GsPRO™ (polypropylene) 3" core film is available in 11.75” to 24.5” widths, specifically designed for the
sampling, presentation folder, packaging, and bookcover industry. It provides an extremely high-gloss surface that
is specially treated to achieve a high dnye level, allowing the acceptance of all types of surface treatments, spot UV
coatings, foil stamping, and most glues. It has excellent folding characteristics.

1.2 mil GsPRO™ GLOSS (3" Core)
Roll Size 1-6 7-11 12+ Code HELPFUL HINT:
11.75" x 10000' $389.16 $347.76 $306.36 LFGSD.3.1175.10000
HELP, MY PRINTS ARE CURLING!
12.75" x 10000' $422.30 $377.37 $332.45 LFGSD.3.1275.10000 With a roll laminator, a curl upward
or downward is the result of too much
13.75" x 10000' $455.41 $406.96 $358.52 LFGSD.3.1375.10000
tension on that particular mandrel. Slowly
18.5" x 10000' $612.74 $547.55 $482.37 LFGSD.3.1850.10000 adjust the tension until the curl disappears.
When the top and bottom tension is
19.5" x 10000' $645.86 $577.15 $508.44 LFGSD.3.1950.10000
balanced, your items will lay flat. For
22.5" x 10000' $745.23 $665.95 $586.67 LFGSD.3.2250.10000 assistance with this, call our service
department at 1.877.267.8324.
24.5" x 10000' $811.46 $725.13 $638.81 LFGSD.3.2450.10000

INDUSTRIAL
HIGH-SPEED LAMINATING

DUPLEX PRODUCTION
LAMINATION SYSTEM

• Includes 30” Duralam F550 high speed laminator,
automatic sheet feeder and high-speed cutter
• Laminate at speeds up to 65' per minute with one operator
• Options available: slit scrap rewinder, mark detection
kit for cutting on crop marks, and an inline punch for
laminated book binding jobs

HELPFUL HINT:

We recommend doing a seal test on any laminated piece to see how well the film is stuck to the
printed media. To perform a seal test:
• Without cutting through the printed media, use a sharp knife to cut an “X” in the lamination.
• Peel back the corner of the “X” to test adhesion quality.
• If ink pulls away from the paper with the film, your laminate is adhered well.
All laminates will cure and be stuck better 24 to 48 hours after lamination.

www.cortechquality.ca 13