Page 91 - FanPedia - By Aerovent

®
FAN-PEDIA PROPELLERS
Published by AEROVENT.COM
Aerovent OVERVIEW
©2017

“BSA & BSP”

RH ROTATION (Backswept Prop)
ALUMINUM RH ROTATION
PROP POLYPROPYLENE
PROP
Propeller Overview
• Available in 2, 3, 4, 5, 6, 9, 10 and 12 blades
• Blades can be trimmed to meet any diameter
from 12” to 81”
• Uses split taper lock bushings, straight bore not
available due to the die cast hub
• 319 Aluminum (Standard Material)
• Polypropylene (Optional Blade Material)
ADJUSTABLE PITCH PROPELLERS
SIZES 12” – 81” Airflow Direction & Rotation
• Blades can be rotated 180 degrees for reversed
Rotation: RH Only airflow
NOTE #1 - Rotation is determined
by viewing the propeller from
the air discharge side.
Intake
Note #2 - To reverse airflow, the
propeller blades are rotated
180 degrees (bushing is always Standard
accessible for proper tightening Configuration
MP Airflow
onto shaft)
Discharge

STANDARD AIRFLOW Discharge
(MP)
Reverse
air passes over Configuration
Motor then PM Airflow
through Prop Intake
aka: Hub on Discharge
46