Page 142 - Icon Ridge Presents ORION
P. 142
Thread tools \ Thread-cutting sets
HSS hand tap set in box ( DIN 352 )
for universal use up to 1000 N/mm 2
M HSS
1xd
Application: two rings (Type D) and third tap (plug) (Type C) for
For producing metric threads by hand in through M3, M4, M5, M6, M8, M10, M12
holes and blind holes, in steel, non-ferrous metals Ident. No. 020: Hand tap set, HSS, comprising
and (cast iron) material groups up to a strength of taper tap with one ring (Type A), second tap with
2
1000 N/mm . two rings (Type D) and third tap (plug) (Type C) for
Execution: M3, M4, M5, M6, M8, M10, M12 and core drills
Ident. No. 010: Hand tap set, HSS, comprising Advantage:
taper tap with one ring (Type A), second tap with Standard geometry with very good price/perfor-
mance ratio
2
Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
13396010
13396020
Cutting material HSS HSS
3 hand taps for each size (taper
3 hand taps for each size (taper tap/second tap/third tap (plug))
Composition of set tap/second tap/third tap (plug)) M3/M4/M5/M6/M8/M10/M12,
M3/M4/M5/M6/M8/M10/M12 1 of each core drill with diameter
2.5/3.3/4.2/5.0/6.8/8.5/10.2
Colour ring system Steels Steels
13396... Ident. No. 010 020
Prod. Gr. 1DC
Thread-cutting tools sets
for universal use up to 1000 N/mm 2
M MF G HSS
1xd
Application: Execution:
Ident. No. 312–900: for producing metric (M) male and female threads by hand Ident. No. 312: Hand tap sets, HSS, comprising taper tap with one ring (Type
in blind holes and through holes, in steel, non-ferrous metals and (cast-iron) A), second tap with two rings (Type D) and third tap (plug) (Type C) and die with
material groups up to a strength of 1000 N/mm . 2 tap wrench and thread gauge
Ident. No. 902: for producing fi ne male and female metric threads (MF) by hand Ident. No. 520–900: Hand tap sets, HSS, comprising taper tap with one ring
in blind holes and through holes, in steel, non-ferrous metals and (cast iron) (Type A), second tap with two rings (Type D) and third tap (plug) (Type C) and
material groups up to a strength of 1000 N/mm . 2 die with tap wrench, die holder and thread gauge
Ident. No. 904: for producing male and female pipe (G) threads by hand in blind Ident. No. 902–904: Hand tap sets, HSS, comprising taper tap with one ring
holes and through holes, in steel, non-ferrous metals and (cast iron) material (Type A) and third tap (plug) (Type C) and die with tap wrench, die holder and
groups up to a strength of 1000 N/mm . 2 thread gauge
Advantage:
Standard geometry with very good price/performance ratio
Ident. No. 312–520, 904 Ident. No. 900 Ident. No. 902
Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
2
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
13399312
13399520
13399900
13399902
13399904
3 hand taps for each
3 hand taps for each 3 hand taps for each size (taper tap/second 2 hand taps for each size
(taper tap and third tap
size (taper tap/second size (taper tap/second tap/third tap (plug)) (plug)) and 1 die for each size 2 hand taps for each size
tap/third tap (plug))
tap/third tap (plug))
Composition of set and 1 die for each size and 1 die for each size and 1 die for each size M3x0.35/M4x0.35/M5x0.5/ (taper tap and third tap (plug))
and 1 die for each thread size
M6x0.75/M8x1/M10x1.25/
M3/M4/M5/M6/
M3/M4/M5/M6/M8/ M5/M6/M8/M10/ M8/M10/M12/M14/ M12x1.25/M14x1.5/ 1/8”/1/4”/3/8”/1/2”/3/4”/1”
M12/M14/M16/
M16x1.5/M18x1.5/
M10/M12 M18/M20 M16/M18/M20/ M20x1.5/M22x1.5/M24x1.5
M22/M24
13399... Ident. No. 312 520 900 902 904
Prod. Gr. 1DC
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 142
0292_EN_2018_KERN[21847432]-d.indd 292 12/17/2018 3:32:23 PM
