Page 187 - Icon Ridge Presents ORION

Milling tools monoblock \ Labelling and marking tools

Marking tools
…and your machine marks economically

the AMF-Writer and AMF-Marker are tools for permanently marking workpieces. they are preferably clamped
in collet chucks and Weldon chucks, and mounted in the machine spindle of a CNC machine.
marking is achieved through a combination of material compaction and material displacement, which we call
“rolling”. in other words, the mark is generated by means of a special needle with extremely hard ball.

through the special design and very high-quality guides, it is possible for this tool to produce uniform and
high-quality marking on rough or smooth surfaces which are uneven by between 3 and 9 mm without height
compensation from the spindle. it can be infi nitely adapted to different materials, material hardnesses and

to realise different marking depths.

this tool is especially economical due to the low purchase costs, long service life and the enormous time
saving.

advantages at a glance:
 the surface is not weakened or damaged, but compacted and thus strengthened
 high marking speeds are possible
 high wear resistance, resulting in long service life
 also suitable for thin-walled workpieces
 no ridge is produced on the marking line
 high-quality typeface
 workpiece unevenness is compensated for
 also suitable for marking rounded surfaces (up to 15°)
 depending on the version, it is possible to mark surfaces with a hardness of up to 57 HRC
 no noise generated

Are you producing or are you still marking?
…faster rationalisation through significantly reduced marking times

marking time savings a er use

60 min. 12 min. €20,000 €40,000 €60,000
conventional
marking method AMF marking tools single-layer dual-layer triple-layer

using the marking tools has proven to reduce marking time in the machining centre by over 75 %.
if 60 minutes used to be spent per shi on 60 marking operations in a machining centre, deploying the AMF marking tool will reduce the pure marking time to

12 minutes.
through automated workpiece loading and the ability of the tool to mark at speed, you can achieve savings in series. our customer example shows savings of
€ 60,000 per year, based on three-shi manufacturing utilisation. This guarantees rapid amortisation of the invested sum.

process conventional marking method with marking tool
machine cost (in €/h) 100 100
number of marking operations per shi (8 hrs) 60 pieces 60 pieces

time per marking operation 60 seconds 12 seconds
time per marking operation per shi 60 minutes 12 minutes
costs for marking per shi €100 €20
annual marking costs (250 working days) €25,000 €5000
savings per year/shi €20,000

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 187

0353_EN_2018_KERN[21847583]-m.indd 353 12/17/2018 3:32:21 PM