Page 198 - Catalogue-test

Fix25 Flexible Adhesive Sealant White 600ML
DYNAMIC TRIM CONTROL SYSTEMS
FIXTECH ADHESIVES & SEALANTS
Powerfix PFM25 Low Modulus conforms to standard ISO 116000-F-25LM and is a high quality
single component joint sealant with high adhesive strength and excellent elasticity. It is based on
MS-Polymer, is chemically neutral and fully elastic. For use in high movement joints in construction,
automotive, marine and aerospace areas where a tough flexible rubber is required.

Colour Non-Yellowing White and Grey (available in Black on request)
Consistency Stable Paste
Curing Mechanism Moisture Cure
Specific Gravity 1.45g/mL AMI Code Supplier Code Colour Size (ml)
Skin Formation 10 Min.
(23 °C - 65%r.h.) 0350010 PF25WHL06 White 600
Through Curing Speed 2 mm in 24 hours 0350012 PFM25BKL06 Black 600
(23 °C - 65%r.h.)
Change in volume < 2%
Hardness Shore A 20 ± 5
Maximum deformation + 25%
Elongation at break +750 %
Elastic Modulus 100% 0.36 N/mm2
(DIN 53504, ASTM D412, Product only)
Tear Strength 1.8 N/mm2
(DIN 553504, ASTM D412, Product only)
Temperature Resistance From –40 °C to +100 °C (Fully Cured)
Packaging Cartridges 290mL, (As required)
Sausages 600mL (In stock)
Shelflife + 18 months stored in a cool and dry place

Fix15 MSP15 Multi-purpose White

(NON YELLOWING) 290ML

Fix15 MSP15 is a high quality, single-component flexible adhesive joint sealant that is suitable for
above and below the waterline applications. Based on MS-Polymer®, it is chemically neutral and fully
elastic. Suitable for use in low movement structural joints in marine, it is also suitable for automotive,
aerospace, and construction applications where a tough flexible adhesive sealant is required. Fix15
MSP15 is available in Black, White.

Base MS Polymer® AMI Code Supplier Code Colour Size (ml)
Consistency, Density Stable Paste, 1.55kg/m3 0350020 MSP15WHL03 White 290
Curing system Moisture Cure 0350022 MSP15BKL03 Black 290
Skin Formation(*) Approx. 15 min (23°C/ 50% R.H) 0350024 MSP15WHL06 White 600
Tack Free Time (*) Approx. 4 hours (23°C/ 50% R.H) 0350026 MSP15BKL06 Black 600
Cure Rate (*) 3mm/24hr (23°C/50%R.H) 030018 MSP15GYL03 Grey 290
Hardness 48 Shore A
Change In Volume <2%
Specific Gravity 1.55 kg/m3
Maximum Deformation ± 20%
Temperature Resistance (cured) -40°C -100°C
Elastic Modulus 100% 1.1 N/mm² (ISO37, DIN 53504)
Tensile Strength 2.2 N/mm² (ISO37, DIN 53504)
Elongation At Break > 300% (ISO37, DIN53504)
Shear Strength >1.6N/mm² (ISO37, DIN 53504)
(*) Values may vary depending on environmental conditions

Adhesives and Sealants | AMI Marine Catalogue 2