Page 199 - Catalogue-test

FixSeal MSPCLEAR Multi-purpose 290ML

FixSeal MSPCLEAR is a high quality single-component, flexible and 100% clear, extra strong
adhesive joint sealant that is suitable for above and below the waterline applications. Based
on MS-Polymer® it is chemically neutral and fully elastic. Suitable for use in low movement
joints in marine, FixSeal MSPCLEAR is also suitable for automotive, aerospace and construction
applications where a tough flexible clear adhesive sealant is required.

Base Polymer
Consistency Stable Paste 100% Clear AMI Code Supplier Code Colour Size (ml)
Curing system Moisture Cure 0350028 MSPClearL03 Clear 290 FIXTECH ADHESIVES & SEALANTS
Skin Formation(*) Approx. 12 minutes
(23°C and 75% R.H)
Cure Rate (*) 3mm/24Hrs
(23°C and 75% R.H)
Hardness 40 Shore A
Change In Volume < 2%
Specific Gravity 1.04g/ml
Maximum Deformation ± 15%
Temperature Resistance (cured) -40°C to 100°C
Elastic Modulus 100% 1.0 N/mm2
Tear Strength 1.0N/mm2
Elongation At Break > 330%
Shear Strength: 1.0n/mm2
(*) Values may vary depending on environmental conditions

Fix30 Timber & Tile Bonding Wall & Floor

Adhesive Sealant Light Brown 600ML

FIX30 is a solvent and water-free universal flexible adhesive. Suitable for bonding many types of timber,
stone, marble, granite, and other products onto a variety of surfaces including concrete, steel, alumini-
um and fibreglass. It is an ideal exotic timber adhesive suitable for external and internal applications for
marine, commercial and high quality residential timber decks.

Base SMX Polymer AMI Code Supplier Code Colour Size (ml)
Consistency Paste 0350048 FF30BRL06 Lt Brown 600
Curing system Chemical Cure 0350049 FF30WHT06 White 600
Open Time @ 21° and 50% R.H (*) Approx. 30-40 minutes
Adjustability Time @ 21° and 50% R.H (*) Approx. 10 minutes
Specific Gravity (DIN 53479) Approx. 1.65g/cm
Viscosity (Brookfield mPa.s) Approx. 56.000 (HBT A/10)
Elongation at Break Approx. 300%
Application Rate 800-1200g/m2 depending
on substrate
Total Solids Content 100% (solvent free)
Temperature Resistance (cured) -40°C to 90°C
Durability Against Aging Good
Set to Load Bearing Min. 12hrs
Sanding Finishing Min. 12 Hrs
Shear Strength: > 1.5 N/mm2

(*) Values may vary depending on environmental conditions

3 Adhesives and Sealants | AMI Marine Catalogue