Page 202 - Catalogue-test

Fix8 Structural Grade Silicone Black 300ML
DYNAMIC TRIM CONTROL SYSTEMS
FIXTECH ADHESIVES & SEALANTS
Fix8 Black is a high quality architectural grade single component high modulus structural silicone sealant,
neutral cure, that exhibits excellent physical properties. Suitable for typical sealing and structural bonding
in glazing applications with metal, aluminium, Corian® most plastics and fibreglass substrates.

Base Hybrid Silane
Consistency Paste
Curing System Moisture Cure, Neutral Cure
Paint-ability Not Paintable
Colours Black, White, Aluminium, Translucent AMI Code Supplier Code Colour Size (ml)
(Other colours on request, MOQs apply) 0350052 FIX8BKL03 Black 300
Skin Formation Aluminium 10-15 minutes (230 C & 50%R.H) 0350054 FIX8ALL03 Aluminium 300
Translucent 10-15 minutes (230 C & 50%R.H) 0350056 FIX8WHL03 White 300
Black 25-30 minutes (230 C & 50%R.H) 0350058 FIX8TPL03 Translucent 300
White 25-30 minutes (230 C & 50%R.H)
Tack Free Time 3 hours (230C & 50%R.H)
Curing Rate 3mm/24 Hrs
Density 1.34 g/cm3
Shrink None
Elongation 300%
Hardness (Shore A) 40±5
Tensile Strength >1.1 Mpa (ISO8339)
Shear Strength > 1.5 Mpa
Movement Capability 25% - 30% maximum
(*) Values may vary depending on environmental conditions

Fuel Master AC240
100% Fuel Resistant Adhesive Sealant 500ML

FAC240 Class B is a two-part polysulfide paste product with an open time of 30 minutes. FAC240 is a
quick turn around rapid cure adhesive sealant for use in marine, automotive and aircraft fuel tanks.

Base Polysulfide
Consistency Thick paste AMI Code Supplier Code Size (ml)
Colour Grey : Base (white) Accelerator (black) 0350060 FAC240PLS05 500
Curing System Chemical cure (2 pack)
Skin Formation Ca. 30 minutes (23°C & 55% R.H.)
Tack Free Time 5 Hrs (23°C & 55% R.H.)
Curing Rate 6 Hrs to immersion, full strength 7 days @ (23°C/55% R.H.)
Change in Volume 5%
Hardness Shore A 60
Maximum Deformation No cracking when bent 180° over a 3mm mandrel.
Weight Loss No more than 6% loss of sealant compound after fluid Immersion
Specific Gravity 1.61 gm/L
Temperature Resistance -54°C until +121°C Intermittent exposure to 182°C
Character Thixotropic, does not slump
Elongation at Break +300%
Tensile Strength >2.0 N/mm2 (ISO 8839)
Shear Strength >2.0 N/mm2 (ASTM D1002)
Thermal Rupture Resistance Does not blister or sponge
Corrosion None
Fungus Resistance Meets MIL-STD
Shelf Life 9 months
Non Volatile Content 98%
(*) Values may vary depending on environmental conditions

Adhesives and Sealants | AMI Marine Catalogue 6