Page 12 - GuardII+ Series 4208 Platform PD User Manual

Hardware

2.2. GuardII+ PD Card Accessories

The installation of a GuardII+ PD card requires some accessories in addition to those
needed for the GuardII+ Series 4208 Platform and other monitoring technologies.

Item Qty Description
1 GuardII+ PD Card 1 This will be custom-built as required by the
number and type of sensors.
If purchased with a new GuardII+ system, this
will be pre-installed in the enclosure.
2 GuardII+ Series 4208 1 A printed copy of this manual
Platform PD Card
Manual
3 Low-Voltage External 1 RG-316, BNC plug to BNC plug
Reference Cable 3 m (10’) length
Labelled “REF”
Optional for BUS and PDA PD card
Included with SSC PD card
4 BNC Adapters 6-24 Right-angle BNC adapters
1 per sensor included with BUS and PDA PD
card
Not included with SSC PD card
5 Set of PD Input Cables: 1 Varies depending on the PD card options as
shown below
for BUS PD card 3 RG-316, BNC plug to BNC plug
pairs 3 m (10’) length each
Labelled “1M/1SYS”, “2M/2SYS” and “3M/
3SYS”
for 6-pair PDA PD 6 RG-316, BNC plug to BNC plug
card pairs 3 m (10’) length each
Labelled “1C1/1C2”, “2C1/2C2”, “3C1/3C2”,
“4C1/4C2”, “5C1/5C2” and “6C1/6C2”
for 12-pair PDA PD 12 RG-316, BNC plug to BNC plug
card pairs 3 m (10’) length each
Labelled “1C1/1C2”, “2C1/2C2”, “3C1/3C2”,
“4C1/4C2”, “5C1/5C2”, “6C1/6C2”, “7C1/
7C2”, “8C1/8C2”, “9C1/9C2”, “10C1/10C2”,
“11C1/11C2” and “12C1/12C2”
for 6-sensor SSC 6 RG-316, SMA plug to BNC plug
PD card pairs 3 m (10’) length each
Labelled “1EW/1S”, “2EW/2S”, “3EW/3S”,
“4EW/4S”, “5EW/5S” and “6EW/6S”
for 9-sensor SSC 9 RG-316, SMA plug to BNC plug
PD card pairs 3 m (10’) length each
Labelled “1EW/1S”, “2EW/2S”, “3EW/3S”,
“4EW/4S”, “5EW/5S”, “6EW/6S”, “7EW/7S”,
“8EW/8S” and “9EW/9S”

4
www.irispower.com