Page 13 - GuardII+ Series 4208 Platform PD User Manual

Hardware

Item Qty Description
for 12-sensor SSC 12 RG-316, SMA plug to BNC plug
PD card pairs 3 m (10’) length each
Labelled “1EW/1S”, “2EW/2S”, “3EW/3S”,
“4EW/4S”, “5EW/5S”, “6EW/6S”, “7EW/7S”,
“8EW/8S”, “9EW/9S”, “10EW/10S”, “11EW/
11S” and “12EW/12S”

Figure 2-2 GuardII+ PD Card Installation Accessories
The following items are also required for the installation but are not provided in the
GuardII+ PD card installation kit.
• PD Sensors and Termination Boxes. These will be included in the appropriate sensor
installation kits.
• Conduit and fittings

• Assorted tools

2.3. Computer Requirements

GuardII+ requires a computer for configuration. Once the monitor is running, a computer
can also be used to download and store measurement results. Refer to the GuardII+ Series
4208 Platform User Manual for computer requirements.

2.4. Initial Inspection
On first receiving the GuardII+ PD card, inspect the shipping container for damage. If the
shipping container or cushioning material is damaged, keep it until the contents of the
shipment have been checked. Check the shipment for completeness (refer to Section 2.2)
and physical damage.

5
www.irispower.com