Page 58 - GuardII+ Series 4208 Platform PD User Manual
P. 58
User Instructions
termination box. If necessary, there is a Delay Assistant that can be used to
approximate the delay time by entering the distance between the sensors on the bus;
the delay time will automatically update when the corresponding distance is changed.
NOTE:
If the delay time is not correct, the data collected by the GuardII+ will not
be correct.
Figure 6-13 Sample BUS PD Sensor Summary
Figure 6-14 BUS Delay Assistant
• When adding PDA sensors, the parallel identification for each sensor should be
verified. Unlike the BUS delay time, this doesn’t affect measurement data.
50
www.irispower.com
