Page 59 - GuardII+ Series 4208 Platform PD User Manual
P. 59
User Instructions
Figure 6-15 Sample PDA PD Sensor Summary
• When adding SSC sensors, the slot number for each sensor should be selected (this
is informational only and does not affect measurement data).
• Additionally, the synchronization phase angle for each sensor must be entered.
Figure 6-16 Sample SSC PD Sensor Summary
• If using an external synchronization signal, the reference angle between the
synchronization and each phase must be entered. If the reference angle is not known,
the Reference Angle Assistant can be used to help determine the proper values. If
necessary, the reference angles can be changed later.
51
www.irispower.com
